Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Next, press the OK Button6and a dropdown menu will appear that contains the available options for that setting. Press the KL Navigation Buttons9until the desired option is highlighted, then press the OK Button 6to select that option. Figure 1 AMain Menu Line BSubmenus CCurrent Settings DInstruction Line Most DVDs are created to allow setup menus to be displayed while the disc is playing, super - imposed over the video playback. However, some discs are authored in a way that does not allow this. If you see the icon displayed on the screen after pressing the Setup Button8or the Info ButtonA, press the Stop Button Iand then press the Setup or Info Button 8Aagain. Set Up Menu The first step in checking or changing the system defaults is to access the Setup Menu. First, make certain that the player is properly connected to a video display, and that power is connected. For this process, however, you do not need to load any discs into the unit. During STOP, PAUSE or PLAY mode, if you press SETUP on the remote, the Set Up Menu appears on the screen. This Main Menu and all menus in the following section may look different, listing the settings with different languages, depending on the settings made previously. With the factory default setting all languages are set to ”English”, that.s why with all menus the English version is shown in the manual. In the SET-UP Menu you will find submenus for making or changing all settings and adjustments for both Audio and Video handling of your player. System Settings Figure 2 The Setup menu screens follow the same basic format. Select a menu by highlighting its tab on the left side of the screen. The menu’s settings will be previewed, but you will not be able to make any changes. See Figure 2. Press the OK Button to make adjustments to the menu. Figure 2a The first setting in the menu will automatically be selected. If you wish to change its value, press the OK Button to view the available options in a dropdown menu, as shown in Figure 2b. Use the KLButtons to highlight the desired option, and press the OK Button to select it. Figure 2b If you wish to close the dropdown menu without changing the setting, press the Return Button. The System Setting Submenu contains the following settings. Follow the explanations in the Instruction Line on the bottom of your screen to change the settings. Display Language: Sets the language in which the OSD menus are shown on your screen. Preferred Subtitle Language: Defines your preferred subtitle language. Every time a disc will be played that contains this subtitle language, it will be shown automatically. If you do not find Press OK to change display language System Setup your preferred language in the list of options, you can select your preferred language by highlighting OTHER. Press OK and use the Navigation Buttons to select your preferred language from the list shown on the screen. Note that only those languages will be available that are actually on the DVD you would like to play. You can also set the preferred subtitle language to OFF. In that case no subtitles will be shown. Panel Time-Out: Sets the time-out interval for the Front Panel Information Display. After the selected time, the display will dim completely. Status Bar Time-Out: Sets the time-out interval for the Status Bar, after which the Status Bar will disappear from the screen. Parental Control: Defines a password used to control viewing of restricted programs. The default password is 1234. After pressing the default password, either the parental control setting can be chosen, or a new password. The five standard US rating symbols are ”G” (General, level 2), ”PG” (Parental Guidance, level 4), ”PG13” (Parental Guidance and 13 years old, level 4), ”R” (Restricted, level 6) and ”NC 17” (from 17 years old, level 7). The DVD will accommodate a total of eight rating steps, as set by the DVD creators. These additional steps allow for more critical control of program playback for all audiences. Level 8: All DVDs can be played. Levels 7 to 2: DVDs for general audiences/ children can be played. Level 1: DVDs for children can be played; DVDs for adults/general audiences are prohibited. Follow the explanations on the screen to set a new password. Disc Recognition: This setting controls the Disc Recognition feature. When turned on, it allows you to pause a DVD, remove it from the player, play another disc, and then resume playback of the original disc at a later time from the point at which you paused. Note that even when the setting is activated, you must pause playback, rather than bring it to a full stop, and the unit must not be turned off between discs. The player is capable of storing the information for up to five DVDs at a time. Screen Saver: Activates a Screen Saver to prevent an image to “burn” into a video display device. If you connect the player to a LCD or plasma screen or video projector, we recommend you activate the screen saver at all times. Show Angle Icon: Determines ...
Otros modelos de este manual:lector de DVD - DVD 39 (1.57 mb)