Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Sony Tamaño del archivo: 710.15 kb Nombre del archivo: Idioma del manual:

When you try to turn the volume too high, “AVLS” flashes in the display. The volume is kept to a moderate level. To cancel AVLS Select “AVLS OFF” in step 2. Note The Mega Bass function does not operate while “AVLS” is set to “AVLS ON.” Locking the controls (HOLD) To prevent the buttons from being accidentally operated when you carry the recorder, use this function. HOLD HOLD 1 Move HOLD in the direction of the .. On the recorder, move HOLD to lock the controls of the recorder. On the remote control, slide HOLD to lock the controls of the remote control. To unlock the controls Move HOLD in the opposite direction of the arrow to unlock the controls. Connecting to a stereo system Connect the i jack of the recorder to the LINE IN jacks of an amplifier or a tape recorder with a line cable (RK-G129 or RK-G136, not supplied). The output is analog. The recorder plays the MD digitally and sends analog signals to the externally connected equipment. RK-G136 Stereo Portable DAT recorder, etc. Stereo system, etc. to LINE IN R (red) L (white) 2 phono plugs RK-G129 (not supplied) mini-plug to i (not supplied) When the recorder is connected to an another audio component through the supplied remote control. When connecting a line cable (not supplied) to the i jack of the remote control, be sure to set the “BEEP” setting to “BEEP OFF.” This keeps the beep sound out of the recorded signal or the output from the externally connected equipment. 1 Press ENTER, press N) or F– (.) repeatedly until the desired preset number appear on the display. Receiving stations outside your country (Excluding European, Saudi Arabian, and Chinese model) You can change the tuning interval and frequency range to suit the geographical region. Jog lever (F+) RADIO ON/BAND RADIO OFF (x) 1 Press RADIO ON/BAND. continued 2 Press and hold RADIO OFF (x) until the frequency indication flashes in the display. 3 Flip the jog lever towards F+ repeatedly until the desired region code appears in the display. A Each time you flip the jog lever, the region code indicated by A changes as follows: A Region FM (MHz)1) AM (kHz)1) J Japan 76.0 - 90.0 531 -1,710 U U.S.A, Canada, and Central and South America 87.5 - 108.0 530 -1,710 E Other countries 87.5 -108.0 531 - 1,602 1) Frequency range 4 Press and hold RADIO OFF (x) until the frequency indication appears in the display. 5 Press RADIO OFF (x) to turn off the radio once, and then press RADIO ON/BAND to turn on the radio. The new setting is stored in memory and is not affe...

Descargar ahora

Introduzca dos números de la imagen: