Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
48 Connecting This Unit to a LAN Network Menu Use the Network menu to send data, save received data, check communications status and perform other network operations. To display the Network menu, select NETWORK MENU from the menu selection screen and press the k (OUT) button. SEND NETWORK MENU Net menu RECEIVE Time counter display ADDRESS BOOK NEW CONTENTS LIST STATUS Monitor screen You can perform the following operations from the Network menu. • Transfer clips or clip segments registered in cliplists. • Transfer data registered in an address book • Receive clip data • Create and edit an address book • Save or delete clips after receiving them • Check communications status • Abort or cancel communications For basic menu operations, see page 72. Creating and Editing an Address Book Before sending and receiving data, you need to register information about the communications destination in an address book. Address book entries contain the host name, IP address, user name, password, and login folder of a communications destination. You can register up to 50 entries. To create or edit an address book, select the ADDRESS BOOK item from Network menu and press the k (OUT) button. SEND NETWORK MENU Adrs Book RECEIVE Time counter display ADDRESS BOOK NEW CONTENTS LIST STATUS Monitor screen If nothing is registered in the address book. A screen like the one shown below appears. NETWORK MENU >-- END ADDRESS BOOK Time counter display --: END Monitor screen Select --: END and press the k (OUT) button. A registration screen for the communications destination appears (see next section). If the address book already contains data A screen like the one shown on the next page appears, containing a list of registration numbers and arbitrarily assigned host names. Chapter 5 Network Operations Network Menu / Creating and Editing an Address Book Chapter 5 Network Operations NETWORK MENU ADDRES BOOK>01HOST1 01: HOST1 Time counter display 02: HOST2 03: HOST3 04: HOST4 05: HOST5 06: HOST6 Monitor screen Select a destination and press the k (OUT) button to display the information for that destination. You can change the information as required (see page 51). Registering Host information in an Address Book The figure below shows the ADDRESS BOOK DATA screen. Enter a host name (up to 8 characters) and the host information, consisting of the IP address, user name, password, and folder to use in communications. The password and folder name do not have to be entered if they have not been specified. Note Host name is a general term for destination data. ADDRESS BOOK DATA HOST: IP : 000.000.000.000 USER: PASS: DIR : APPEND : (<-)+SET KEY TO MENU : MENU KEY Host name IP address User name Password Folder to use in communications Use the following procedure to register host information. 1 Select HOST and press the k (OUT) button. The HOST PRESET screen appears. HOST PRESET HOST: SHIFT : (<-)(->)KEY CHAR SELECT : JOG DIAL DELETE : RESET KEY DATA SET : SET KEY TO MENU : MENU KEY 2 Enter the host name. To enter characters Rotate the search dial until the desired character appears. Characters appear in the following order when you rotate the search dial in the clockwise direction. A to Z,[, ], ^, _, `, a to z, {, |, }, ~, !, ", #, $, %, &, ',(, ), *, +, -, ., /, 0 to 9, :, ;, <, =, >, ?, @ Characters appear in the reverse order when you rotate the search dial in the counterclockwise direction. To delete a character after entering it, press the RESET button. To move the cursor Press the K (IN) or k (OUT) button. To confirm a host name Press the SET button. You are returned to the ADDRESS BOOK DATA screen. 3 Next enter the IP address (IP), user name (USER), password (PASS), and folder to use in communications (DIR). Notes • When you are entering an IP address, the only characters which appear as you rotate the search dial are digits. • Do not specify a folder name (DIR) to exchange data between two DSR-DR1000A/DR1000AP units. Communications will not be carried out correctly if a folder is specified. 4 When you have set all the required items, check the information on the ADDRESS BOOK DATA screen and confirm by pressing the SET button with the K (IN) button held down. Creating and Editing an Address Book ADDRESS BOOK DATA HOST: HOST1 IP : 192.168.000.001 USER: USER1 PASS: ******** DIR : /user/local/bin/ APPEND : (<-)+SET KEY TO MENU : MENU KEY The host data is saved under registration number 01. To cancel the registration without saving any data Press the MENU button. Editing an Address Book You can change the information in an address book entry and save it under the same registration number or a different registration number. In the host list (see “If the address book already contains data” on page 49), select the entry you want to change and press the k (OUT) button. The data for the selected entry appears. ADDRESS BOOK DATA HOST: HOST1 IP : 192.168.000.001 USER: USER1 PASS: ******** DIR : /user/local/bin/ DELETE : RESET KEY MODIFY : SET KEY APPEN...
Otros modelos de este manual:lector de DVD - DSR-DR1000A (1.89 mb)