Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
The two effects are cut and dissolve. A cut instantaneously switches from one input to another. A dissolve causes one input to fade out while fading in another selected input. The dissolve effect duration is adjustable. For these effects to occur, the initial input must be on input 1 with the output resolution locked to input 1 (“Resol Lock to #1”). See the “Output Configuration” section in this chapter for instructions on locking the resolution. Using either the horizontal Adjust ( ) or vertical Adjust ( ) knob, select either cut or dissolve. The default is cut. The dissolve effect has a switch transition period which is adjustable from 0.2 seconds to 1.0 seconds in 0.1 second increments. Attempting to adjust the period below 0.2 seconds will return to the cut effect. Pressing the Take button after selecting a second input will initiate the switching effect between input 1 and the selected input. Edge smoothing This submenu features edge smoothing. Edge smoothing smooths edges of a picture by minimizing the differences between pixels. Using either the horizontal Adjust ( ) or vertical Adjust ( ) knob, select either “On” or “Off”. The default is “On”. Top and bottom blanking (blanking adjustment) To remove noise or extraneous material such as closed captioning by removing scan lines at either the top or bottom of the screen, adjust the top blanking or bottom blanking. Rotate the horizontal Adjust ( ) knob to set the number of lines removed from top of the picture. Rotate the vertical Adjust ( ) knob to set the number of lines removed from the bottom. Both the top and bottom blanking adjustments range from 0 to 127, with the default setting being set to 0 for either adjustment. DVS 406 • Installation and Operation 2-15 Installation and Operation, cont’d RGB delay (Triple-Action Switching) With Triple-Action Switching, the DVS 406 switches to the new sync signal before switching RGB (video) signals. That allows the display device to adjust to the new sync timing after a brief delay (during which the display is blanked) before displaying the new picture, which will appear without glitches. Triple- Action Switching is also known as video mute switching. Use the horizontal Adjust ( ) knob or vertical Adjust ( ) knob to select the blanking period (RGB delay time) from 0 seconds (default) to 5 seconds in 0.5 second steps. Switch mode From this submenu, the input switching method may be selected. The two choices are Take (default), which requires the Take button to be pressed to initiate the switch, and Auto, which causes the switch to occur as soon as the selected input button is pressed. Use either the horizontal Adjust ( ) or vertical Adjust ( ) knob to specify the switch mode. Blue mode To aid in setup of the scaler’s color and tint, the Blue mode can be set from this submenu to “On” so that only sync and blue video signals will be passed to the d...
Otros modelos de este manual:lector de DVD - DVS 406 A (2.12 mb)
lector de DVD - DVS 406 D (2.12 mb)
lector de DVD - DVS 406 (2.12 mb)
lector de DVD - DVS 406 AD (2.12 mb)