Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck. COAXIAL S-VIDEO OUT VIDEO OUT R CB/PB CR/PR I PROGRE SSIVE COMPONENT VIDEO OUT A/V-compatible or wide screen TV Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. or To COAXIAL DIGITAL AUDIO OUT jack To VIDEO INPUT jack To VIDEO OUT jack To S-VIDEO INPUT jack To S-VIDEO OUT jack To COAXIAL DIGITAL AUDIO INPUT jack [Fig. 7] NOTES: • The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by a MD or DAT deck. • Set DOLBY DIGITAL to PCM for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.(See page 13 to set BITSTREAM for DOLBY DIGITAL.) Connecting to a Dolby Digital decoder If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. Use an audio coaxial digital cables (commercially available) for the audio connections. Front speaker Center speaker Front speaker (left) (right) Surround Surround speaker speaker Subwoofer (left) (right) [Fig. 8] NOTES: UDIO OUT DIGTAL OUT PCM/ BITSTREAM COAXIAL S-VIDEO OUT L Y CR/PR VIDEOR CB/PB I P PROGRE SSIVE COMPONENT VIDEO OUT To COAXIAL DIGITAL AUDIO OUT jack To VIDEO INPUT jack To VIDEO OUT jack To S-VIDEO INPUT jack To S-VIDEO OUT jack To COAXIAL DIGITAL AUDIO INPUT jack A/V-compatible or wide screen TV Dolby Digital decoder or • If output Dolby Digital audio, connect to a Dolby Digital decoder, and set DOLBY DIGITAL to BITSTREAM for audio output in the setup mode. • Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to PCM for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks I A/V-compatible or wide screen TV To Right (red) and Left (white) AUDIO OUT jacks To Right (red) and Left (white) ANALOG AUDIO INPUT jacks To COMPONENT VIDEO INPUT jack To COMPONENT VIDEO OUT jack Stereo system [Fig. 9] NOTES: • If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player, and make sure INTERLACE/PROGRESSIVE SCAN SELECTOR is set to P. HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above. NOTE • The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator. –8– EN PLAYING A DISC Basic Playback Disc Menus DVD CD DVD Getting started • Turn on the power of the TV, amplifier and any other components which are connected to the DVD. • Make sure the TV and audio receiver (commercially available) are set to the correct channel. Press y/I . 4 3 2 1 •“P-ON”will appear briefly on the display panel. Press OPEN/CLOSE to open disc loading tray. Place the chosen disc in the tray, with the label facing up. Press PLAY. •The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. •When you playback the DVD with a title menu is recorded, it may appear on the screen. In this case, refer to “TITLE MENU”. 5 Press STOP to stop playback. NOTES: •A “prohibited icon”may appear at the top- right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. •With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. •During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. General Features DVD may contain menus to navigate the disc and access special...