Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
• The Virtual Surround effect is output only through the analog AUDIO OUT jacks. • Make sure that Audio Output Mode is set to 2 Channel. • How good the surround effect is varies with the disc. En (text) 37 (text) 7 (text) (text) (1) 1 (text) (text) (text) This Menu is available by using The Audio Settings Menu The Audio Settings Menu (text) the joystick to move the cursor (text) one step below "Virtual Surround" Set the distance for each speaker. (text) composite video outputs. Audio Settings 3/3 Speaker Distance L Speaker Distance C Speaker Distance R Speaker Distance LS Speaker Distance RS Speaker Distance SW 10.0 ft. 10.0 ft. 10.0 ft. 10.0 ft. 10.0 ft. 10.0 ft. • Use the joystick (up/down) to select a speaker. • Use the joystick (left/right) to adjust the distance from your listening position to that speaker. Front left/right (L/R) speakers can be set from 1.0 ft. to 30 ft. in 0.5 ft. increments. Center speaker (C) and subwoofer (SW) can be set from – 6.5 ft. to +6.5 ft. relative to the front left/right speakers Surround left/right (LS/RS) speakers can be set from –20 ft. to +6.5 ft. relative to the front left/right speakers. When you adjust the front left (L) or front right (R) speaker, all the other speaker distances are adjusted relative to that speaker. (text) 6 Press ENTER to make the settings and exit the audio settings screen. • The speaker distance settings have no effect on SACD playback. (text) • You can’t adjust the channel level for any speakers that are set to Off in the Speaker Installation menu screen (page 64). (text) (text) (text) 38 (text) 7 • The Fix setting is equivalent to setting all the channel levels to +6 dB. Therefore, the Variable setting will usually sound quieter than the Fix setting. (text) En (1) 1 The Video Settings Menu 07 The Video Settings Menu 07 (text) (text) Video Adjust -Interlace Only • Default setting: Standard From the Video Adjust screen you can select the standard video presentation or define presets of your own. 1 Press SETUP and select ‘Video Adjust’ from the on-screen display. You can also access these settings by pressing V.ADJ (VIDEO ADJUST). Audio Settings Play Mode Setup Navigator Disc Navigator Initial Settings Video Adjust 2 Use the joystick (left/right) to select a preset. Standard Video Adjust • Standard – Normal • I. Memory1–2 Use for making your own interlaced presets (see below) 3 Press ENTER to make the setting and exit the Video Adjust screen. • Depending on the disc and the TV/ monitor, you may not see the effect clearly. Creating your own interlace output presets 1 Select one of the Memory presets (see above). 2 Move the joystick down to select ‘Detailed Settings’ then press ENTER. I.Memory1 Detailed Settings Video Adjust 3 Adjust the picture quality settings. Recall Settings Fine Focus Contrast Sharpness Chroma Level Hue I.Memory1 On Interlace Memory 1 (I. Memory 1) min max soft fine min max green red • Use the joystick (up/down) to select a setting. • Use the joystick (left/right) to adjust the current setting. • Press DISPLAY to switch between full and single view. • You can change the preset number from the Recall Settings menu item. You can adjust any or all of the following picture quality settings: • Fine Focus – Switch On to reveal greater detail (high resolution) in the picture. • Contrast – Adjusts the contrast between light and dark elements in the picture. • Sharpness – Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. (This setting is only effective when Fine Focus is On.) • Chroma Level – Adjusts how saturated colours appear. • Hue – Adjusts the overall colour balance between red and green. (This is En (text) (text) composite video outputs. (text) 39 (text) 7 (text) (1) 1 (text) The Video Settings Menu The Video Settings Menu (text) 4 Press ENTER to save the preset and exit the Video Adjust screen. (text) Creating your own progressive output presets These presets are available when the video output is set to progressive. (Use the front panel PROGRESSIVE button to switch between interlace and progressive video (text) output. See also page 18) 1 Select one of the Memory presets (see above). 2 Move the joystick down to select ‘Detailed Settings’ then press ENTER. P. Memory1 Detailed Settings Video Adjust 3 Ajust the picture quality settings. Recall Settings PureCinema Sharpness Contrast Brughtness Chroma Level Hue soft fine soft fine off max min max green red Progressive Memory 1 (P. Memory 1) Auto P.Memory1 • Use the joystick (up/down) to select a setting. • Use the joystick (left/right) to adjust the current setting. • Press DISPLAY to switch between full and single view. • You can change the preset number from the Recall Settings menu item. You can adjust any or all of the following picture quality settings: • PureCinema – When watching DVD movies, PureCinema optimizes the picture quality. The default setting is Auto, but if the picture appears unnatural, then set to On or Off, as appropriate. • ...
Otros modelos de este manual:lector de DVD - PL-1 (1.91 mb)