Votos - , Puntuación media:
(
)
)
Fabricar: Sony
Tamaño del archivo: 1.68 mb
Nombre del archivo: 3070853311.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
REAR (0dB) Adjust the level of the rear speakers (–12dB to 0dB, 0.5dB increments). SUBWOOFER (0dB) Adjust the level of the subwoofer (–10dB to +10dB, 0.5dB increments). To adjust the volume of all the speakers at one time Use the amplifier’s (receiver’s) volume control. continued Settings and Adjustments xTEST TONE The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust the “BALANCE” and “LEVEL.” OFF The test tone is not emitted from the speakers. ON The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the “SPEAKER SETUP” items, the test tone is emitted from both left and right speakers simultaneously. Adjusting the speaker volume and level 1 Select “SPEAKER SETUP” in the Setup Display. 2 Select “TEST TONE” and set to “ON.” You will hear the test tone from each speaker in sequence. 3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using C/c and “LEVEL” using X/x. The test tone is emitted from both left and right speakers simultaneously. 4 Select “TEST TONE” and set to “OFF” to turn off the test tone. Notes • When you adjust the speaker settings, the sound cuts off for a moment. • The test tone signals are not output from the digital jack. 94 Additional Information Additional Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. , Check that the mains lead is connected securely. Picture There is no picture. , The connecting cords are not connected securely. , The connecting cords are damaged. , The player is not connected to the correct TV input jack (page 20). , The video input on the TV is not correctly set. , “OFF” in “COMPONENT OUT” under “SCREEN SETUP” is selected, when you have connected the player to a monitor or projector via only the COMPONENT VIDEO OUT jacks. To view the picture, connect the monitor via LINE 1 (RGB)-TV, VIDEO OUT, or S VIDEO OUT jack. , In the Setup Display, set “LINE” and “COMPONENT OUT” in “SCREEN SETUP” to the appropriate item conforms to your system (page 84). , You have pressed VIDEO ON/OFF (or VIDEO OFF) (page 38). Picture noise appears. , The disc is dirty or flawed. , If the picture output from your player goes through your VCR to get to your TV, the copy- protection signal applied to some DVD programmes could affect picture quality. If you still experience problems even when you connect your player directly to your TV, please try connecting your player to your TV’s S video input (page 20). Even though you set the aspect ratio in “TV TYPE” of “SCREEN SETUP,” the picture does not fill the screen. , The aspect ratio of the disc is fixed on your DVD. The picture is black and white. , In the Setup Display, set “LINE” in “SCREEN SETUP” to the appropriate item that conforms to your TV (page 84). , Depending on the TV, the picture on the screen becomes black and white when you play a disc recorded in the NTSC colour system. Sound There is no sound. , The connecting cord is not connected securely. , The connecting cord is damaged. , The player is connected to the wrong input jack on the amplifier (receiver) (page 26, 28, 30). , The amplifier (receiver) input is not correctly set. , The player is in pause mode or in Slow-motion Play mode. , The player is in fast forward or fast reverse mode. , If the audio signal does not come through the DIGITAL OUT (OPTICAL or COAXIAL) jack, check the audio settings (page 89). , SACD audio signals are not output from the digital jack. Sound is noisy. , The disc is dirty or flawed. Sound distortion occurs. , Set “AUDIO ATT” in “AUDIO SETUP” to “ON” (page 88). continued Additional Information The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track. , Check the speaker connections and setting (page 26, 32, 89) , Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital, DTS, or MPEG audio format. The sound comes from the centre speaker only. , Depending on the disc, the sound may come from the centre speaker only. , Set “SURROUND” to “OFF” in the Control Menu display (page 62). Operation The remote does not function. , There are obstacles between the remote and the player. , The distance between the remote and the player is too far. , The remote is not pointed at the remote sensor on the player. , The batteries in the remote are weak. The disc does not play. , There is no disc inside. , The disc is turned over. Insert the disc with the playback side facing down on the disc tray. , The disc is skewed. , The player cannot play CD-ROMs, etc. (page 6). , The region code on the DVD does not match the player. , Moisture has condensed inside t...
Otros modelos de este manual:- ()