Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
This section describes the i.LINK standard and its features. What is i.LINK? i.LINK is a digital serial interface for handling digital video, digital audio and other data in two directions between equipment having the i.LINK jack, and for controlling other equipment. i.LINK-compatible equipment can be connected by a single i.LINK cable. Possible applications are operations and data transactions with various digital AV equipment. When two or more i.LINKcompatible equipment are connected to this recorder in a daisy chain, operations and data transactions are possible with not only the equipment that this recorder is connected to but also with other devices via the directly connected equipment. Note, however, that the method of operation sometimes varies according to the characteristics and specifications of the equipment to be connected, and that operations and data transactions are sometimes not possible on some connected equipment. b Note Normally, only one piece of equipment can be connected to this recorder by the i.LINK cable (DV connecting cable). When connecting this recorder to i.LINK-compatible equipment having two or more i.LINK jacks (DV jacks), see the instruction manual of the equipment to be connected. About the name “i.LINK” i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronics Engineers. i.LINK baud rate i.LINK’s maximum baud rate varies according to the equipment. Three maximum baud rates are defined: S100 (approx. 100 Mbps*) S200 (approx. 200 Mbps) S400 (approx. 400 Mbps) The baud rate is listed under “Specifications” in the instruction manual of each equipment. It is also indicated near the i.LINK jack on some equipment. The maximum baud rate of equipment on which it is not indicated such as this unit is “S100.” When units are connected to equipment having a different maximum baud rate, the baud rate sometimes differs from the indicated baud rate. * What is Mbps? Mbps stands for megabits per second, or the amount of data that can be sent or received in one second. For example, a baud rate of 100 Mbps means that 100 megabits of data can be sent in one second. i.LINK functions on this recorder For details on how to dub when this recorder is connected to other video equipment having DV jacks, see page 80. The DV jack on this recorder can only input DVC-SD signals. It cannot output signals. The DV jack will not accept MICRO MV signals from equipment such as a MICRO MV digital video camera with an i.LINK jack. For further precautions, see the notes on page 80. For details on precautions when connecting this recorder, also see the instruction manuals for the equipment to be connected. Required i.LINK cable Use the Sony i.LINK 4-pin-to-4-pin cable (during DV dubbing). i.LINK and are trademarks. Additional Information Guide to Parts and Controls For more information, see the pages in parentheses. Remote 1 2 34 5 6 7 89 0 A HDD button (30) DVD button (30) B [/1 (on/standby) button (21) C Z (open/close) button (30) D PROG (programme) +/– buttons (30) The + button has a tactile dot*. E Number buttons (47, 61) The number 5 button has a tactile dot*. F INPUT SELECT button (54, 80) G AUDIO button (57) The AUDIO button has a tactile dot*. H SUBTITLE button (57) I MENU button (55) J TV/DVD button K TOP MENU button (55) L CHAPTER MARK button (70) CHAPTER MARK ERASE button (70) M SYSTEM MENU button (83, 85) TITLE LIST button (32, 55, 67) TIMER button (45, 47) N TIMER LIST button (50) O DISPLAY button (34) P (previous/next) buttons (57) U mc / CM (search/slow/ freeze frame) buttons (57) V H (play) button (55) X (pause) button (57) x (stop) button (55) The H button has a tactile dot*. W TIME/TEXT button (34) X z REC button (30) x REC STOP button (30) c z SYNCHRO REC button (52) REC MODE button (30) Y TV 2 (volume) +/– buttons (18) Z TV [/1 (on/standby) button (18) wj TV PROG (programme) +/– buttons (18) The + button has a tactile dot*. wk TV t button (18) * Use the tactile dot as a reference when operating the recorder. Front panel A [/1 (on/standby) button (21) B Front panel display (113) C Disc tray (30) D A (open/close) button (30) E TIMER REC indicator (45) SYNCHRO REC indicator (52) F H (play) button (55) G x (stop) button (55) H (remote sensor) (18) I z REC button (30) J x REC STOP button (30) K HDD button/indicator (30) DVD button/indicator (30) L DV IN jack (80) M ONE-TOUCH DUB button (82) N PROGRAM +/– buttons (30) The + button has a tactile dot*. O INPUT SELECT button (52, 80) P REC MODE button (30) Q LINE 2 IN (S VIDEO/VIDEO/ L(MONO) AUDIO R) jacks (24) * Use the tactile dot as a reference when operating the recorder. Additional Information Front panel display HDD SMARTLINK DVD VCD NICAM TV DVD A...