Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
If necessary, press TV/DVD on the remote to return the input to the TV. If you connect this recorder to a TV with SMARTLINK, set “Linel Output” to “Video.” For correct SMARTLINK connection, you will need a SCART (EURO AV) cord that has the full 21 pins. See your TV’s instruction manual as well for this connection. JNt 2 OUI INPUT S VIDEO ,continued Step 3: Connecting the Video Cords 17 Basic Hookups and Settings © Connecting to component video input jacks (Y, Cb, Cr) Connect using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate colour reproduction and high quality images. DVD recorder 1“MEGALOGIC” is a registered trademark of Grundig Corporation. *2“EASYLINK” and “CINEMALINK” are trademarks of Philips Corporation. 3“Q-Link” is a trademark of Panasonic Corporation. *4“EURO VIEW LINK” is a trademark of Toshiba Corporation. *5“T-V LINK” is a trademark of JVC Corporation. Z Hint SMARTLINK also works with TVs having EPG Timer Control and Now Recording functions. For details, refer to the operating instructions supplied with your TV. Notes • SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 3/DECODER jack. • Not all TVs respond to the functions above. About the SMARTLINK features (for SCART connections only) If the connected TV complies with SMARTLINK, NexTView Link, MEGALOGIC*1, EASYLINK*2, CINEMALINK*2, Q-Link*3, EURO VIEW LINK*4, or T-V LINK*5, this recorder automatically runs the SMARTLINK function after you complete the connection pattern © on page 17 (the SMARTLINK indicator lights up when you turn on your TV). You can enjoy the following SMARTLINK features. • Preset Download You can download the tuner preset data from your TV to this recorder, and tune the recorder according to that data in Easy Setup. This greatly simplifies the Easy Setup procedure. Be careful not to disconnect the cables or exit the Easy Setup function during this procedure (page 22). • TV Direct Rec You can easily record what you are watching on your TV (page 38). • One Touch Play You can turn on the recorder and TV, set the TV’s input to the recorder, and start playback with one touch of the (play) button (page 51). • One Touch Menu You can turn on the recorder and TV, set the TV to the recorder’s channel, and display the Title List menu with one touch of the TITLE LIST button (page 54). • One Touch Timer You can turn on the recorder and TV, set the TV to the recorder’s channel, and display the timer programming menu with one touch of the TIMER button on the remote (page 41). • Automatic Power Off The recorder will turn off automatically if the recorder is not used after you turn off the TV. • NexTView Download You can easily set the timer by using the NexTView Download function on your TV. Refer to your TV’s instruction manual. 1B Step 3: Connecting the Video Cords Step 4: Connecting the Audio Cords Select the connection that best suits your system. Be sure to read the instructions for the components you wish to connect. 4^ Connecting to your TV This connection will use your TV’s speakers for sound. If you use the SCART (EURO AV) cord in pattern © of "Step 3: Connecting the Video Cords ” (page 17), you do not have to connect audio cords to your TV. DVD recorder Connection Your setup 6 TV • Surround effects: Dynamic, Wide PI Stereo amplifier (receiver) and two speakers • Surround effects: Standard MD deck/DAT deck • Surround effects: None 1 PI f m 6 AV amplifier (receiver) having a i pi t ? Dolby Surround (Pro Logic) decoder 1 and 3 to 6 speakers • Surround effects: Dolby Surround (Pro Logic) A AV amplifier (receiver) with a digital input jack having a Dolby 1 Wsff m % # Digital, MPEG audio, or DTS*2 decoder and 6 speakers • Surround effects: Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio *1 Manufactured under license from Dolby laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. *2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. ICCPONBN •в ■ ~ AC 'N. ["в 1ш1 to LINE 2 OUT (R-AUDIO-L) TV (yellow)* <=1 THUD (white) cm (red) (yellow) (■И> I i (white) Audio/video cord (supplied) (red) [CJL T—AUDIO (o)r : Signal flow * The yellow plug is used for video signals (page 17). z Hint When connecting to a monaural TV, use a stereo-mono conversion cord (not supplied). Connect the LINE 2 OUT (R-AUDIO-L) jacks to the TV’s audio input jack. Do not connect the LINE 4 IN (R-AUDIO-L) jacks to your TV’s audio output jacks at the same time. INPUT VIDEO Note ,continued Step 4: Connecting the Audio Cords 19 Basic Hookups and Settings 4^ Connecting to a stereo amplifier Connecting to an AV amplifier (receiver) and 2 speakers/Connecting (receiver) having a Dolby Surround (Pro to an MD deck or DAT deck Logic) decoder and 3 to 6 speakers If your stereo amplifier (...