Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
4:3 LETTER BOX Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 PAN SCAN Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 16:9 4:3 LETTER BOX 4:3 PAN SCAN Note Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa. . SCREEN SAVER The screen saver image appears when you leave the player in pause or stop mode for 15 minutes, or when you play a CD or DATA CD (MP3 audio) for more than 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver. ON Turns on the screen saver. OFF Turns off the screen saver. . BACKGROUND Selects the background colour or picture on the TV screen in stop mode or while playing a CD or DATA CD (MP3 audio). JACKET PICTURE The jacket picture (still picture) appears, but only when the jacket picture is already recorded on the disc (CDEXTRA, etc.). If the disc does not contain a jacket picture, the “GRAPHICS” picture appears. GRAPHICS A preset picture stored in the player appears. BLUE The background colour is blue. BLACK The background colour is black. . LINE Selects the method of outputting video signals from the LINE (RGB)-TV jack on the rear panel of the player. VIDEO Outputs video signals. S VIDEO Outputs S video signals. RGB Outputs RGB signals. Notes • If your TV does not conform to the S video or the RGB signals, no picture appears on the TV screen even if you select “S VIDEO” or “RGB.” Refer to the instructions supplied with your TV. • If your TV has only one SCART (EURO AV) jack, do not select “S VIDEO.” • When “LINE” is set to “RGB” in “SCREEN SETUP”, you cannot select “COMPONENT OUT” (the player outputs no component video signals). • When “COMPONENT OUT” is set to “ON” you cannot select “RGB.” . COMPONENT OUT (DVP-NS585P only) Allows your TV to receive signals from the COMPONENT VIDEO OUT jacks. ON Select this if you connect your TV to the player’s COMPONENT VIDEO OUT jacks. OFF The player outputs no component video signals About the NORMAL/PROGRESSIVE switch (DVP-NS585P only) The NORMAL/PROGRESSIVE switch on the rear panel of the player selects the signal output from the COMPONENT VIDEO OUT jacks: interlace or progressive. The switch takes priority over the setting made in “COMPONENT OUT.” To switch the video signal format If you have selected “PROGRESSIVE” for a TV that does not accept signals in progressive signals, or if the software’s video signals are not suited for progressive video signal conversion, view the image in Interlace format. Set the NORMAL/ PROGRESSIVE switch on the rear panel of the player to “NORMAL.” z Hint When the player outputs progressive signals, the PROGRESSIVE indicator lights up. Notes • When you connect the player to a monitor or projector via only the COMPONENT VIDEO OUT jacks, do not select “OFF.” If you select “OFF” in this case, the picture may not appear. • When you play video based software with progressive signals, sections of some types of images may appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. • When you set NORMAL/PROGRESSIVE switch to PROGRESSIVE, you cannot select “LINE” and “COMPONENT OUT”. When NORMAL/PROGRESSIVE switch is set to PROGRESSIVE (DVP-NS585P only) You can fine-tune the Progressive 525p/625p video signal output when you set the NORMAL/PROGRESSIVE switch to PROGRESSIVE (the PROGRESSIVE indicator lights up) and connect the player using the COMPONENT VIDEO OUT jacks to a TV that is able to accept the video signal in progressive format. . MODE (Conversion Modes) DVD software can be divided into two types: film based software and video based software. Video based software is derived from TV, such as dramas and sit-coms, and displays images at 30 frames/60 fields (25 frames/50 fields) per second. Film based software is derived from film and displays images at 24 frames per second. Some DVD software contains both Video and Film. In order for these images to appear natural on your screen when output in PROGRESSIVE mode (50 or 60 frames per second), the progressive video signal needs to be converted to match the type of DVD software that you are watching. AUTO This will automatically detect if you are playing Film based or Video based software and convert the signal to the appropriate conversion mode. Normally select this position. VIDEO This will set the conversion mode for Video based software, regardless of the type of software that you are playing. Notes • When you play video based software with progressive signals, sections of some types of images may appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. • Using the LINE OUT (VIDEO) jack, the LINE (RGB) jack, or the S VIDEO OUT jack will cause the TV picture to become u...
Otros modelos de este manual:lector de DVD - DVP-NS585P (1.68 mb)