Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
This product should not be mixed with other commercial wastes for disposal. Features 1. Emergency Hole 2. On/Off Lamp 3. Open/Close Button 4. Disc Tray • Design and specifications are subject to change without prior notice. 1. Sound Output Port 2. Interface Port 3. Master/Slave Selection Port 4. Power Port DVD Writer 40-pin interface cable four screws to install the drive drive installation instruction sheets software programs (software: Nero Express 6, In CD, Nero Vision Express, Nero ShowTime, Nero BackItUp, Nero Recode) • In case you need to return the purchased product, be sure to include all the accessories provided with the product to receive a refund. • The type of accessories varies depending on product model. FeaturesYou need to have an IBM-compatible PC with the following specifications. Item Description OS Microsoft Windows 98 SE/2000/Me/XP(SP 1.0 or higher) Pentium3 800MHz or greater IBM-compatible PC CPU (Recommendation: Pentium4 2.0GHz or higher) RAM 256Mbytes or greater FeaturesVersatile Multimedia Features FeaturesVersatile Multimedia Features DVD-R : Read / Write DVD-RW : Read / Write / Rewrite allowed DVD+R : Read / Write DVD+RW : Read / Write / Rewrite allowed DVD-ROM : Read DVD+R Dual : Read / Write DVD-R Dual : Read / Write CD-R : Read / Write Supports Read (playback) for various types of CD-RW : Read / Write / Rewrite allowed discs DVD-RAM : Read/ Write/ Rewrite allowed See table below for details Disc Type Writable Rewritable Read CD-STAMP . . O CD CD-R O.O CD-RW (O) O O DVD-STAMP . . O DVD-R For General Ver 2.1 O . O DVD-RW Ver 1.1 (O) O O DVD DVD+R(Dual) Basic Ver 1.11 O . O DVD-R(Dual) O . O DVD+RW Basic Ver 1.2 (O) O O DVD-RAM O O O Writable : write once, read many times. Rewritable : write data one or more times. DVD Recommended Disc Types DVD-R Media Taiyo-Yuden, TDK, MKM, Hitachi Maxell, Fuji Film, PVC, Panasonic, RiTEK, CMC, UNIFINO DVD-RW Media TDK, MKM, JVC, PVC, RiTEK, CMC DVD+R Media RICOH, Taiyo-Yuden, MKM, RiTEK, CMC, Prodisc, Optdisc DVD+RW Media RICOH, MKM, RiTEK, CMC DVD±R Dual MKM DVD- RAM Maxell , Taiyo Yuden CD Recommended Disc Types CD-R Media Taiyo-Yuden, RICOH, MKM, Hitachi Maxell, Fuji Film, RiTEK(Phtharo), CMC, Pioneer, Princo, TDK Features CD-RW Media RICOH, MKM, RiTEK, CMC HS CD-RW Media RICOH, MKM, CMC US CD-RW Media MKM Buffer underrun prevention technology included What is " buffer underrun prevention technology "? A technology to prevent "buffer underrun" errors in which the data transmission speed is not as fast as the data writing speed when data is being recorded on a CD. Reading / Recording Speed Reading Speed(MAX) DVD-ROM(S)(16X), DVD-ROM(D)(8X), DVD-R (12X), DVD-RW (8X), DVD+R (12X), DVD+RW (8X), CD-ROM (48X), CD-R (40X), CD-RW (40X), DVD+R DUAL (8X), DVD-R DUAL (8X), DVD-RAM(5X) Recording Speed(MAX) DVD+R DUAL (8X), DVD+RW (8X), DVD-R (16X), DVD+R (16X), DVD-RW (6X), CD-R (48X), CD-RW (32X), DVD-R DUAL (4X), DVD-RAM(5X) and Connecting Cables Installing DVD Writer 1. Turn the PC off. 2. Open the cover as shown in the picture. 3. If necessary, attach the support devices on both sides of the drive - The support devices are PC accessories. Purchase a pair if necessary. (SCREW : M3 X 6 X 4 ) 4. Insert the DVD Writer after removing the plate as below Be sure to use the screws (M3x6) provided with the product. - Using screws other than M3x6 may cause malfunction. Be sure that the screws are tightened securely in place. Loosely tightened screws may result in an increased level of noise. and Connecting Cables Installing DVD Writer Connecting the Power Cable Hold the power cable (with four pins) in the power box within the computer with the cutoff edges( ) facing up and connect it to the power port in the back of the DVD Writer A - Cutoff edges 1 +5V DC 2 Ground 3 Ground 4 +12V DC Improperly connected power cable may cause malfunction. Check the direction of the power cable and the cutoff edges before connecting the cable. and Connecting Cables Installing DVD Writer Connecting E-IDE Cable When you use one E-IDE cable Set the jumper to SL (slave) in the Master/Slave port in the back of the DVD Writer a : Slave Drive (Select the SL jumper) b : HDD c : MotherBoard When you use two E-IDE cables Set the jumper to MA (Master) in the Master/Slave port in the back of the DVD Writer When you have one DVD Writer: Set it to MA (Master) a : Master Drive (Select the MA jumper) b : HDD c : Motherboard d : Primary 1 e : Secondary 1 When you have one DVD Writer and the other ODD products: Set it to MA (Master) / SL (Slave), and Connecting Cables Installing DVD Writer a : Master Drive (Select the MA jumper) b : Slave Drive (Select the SL jumper) c : HDD d : Motherboard e : Primary 1 f : Secondary 1 Connecting the Jumper to the Master/Slave Port Connect the jumper to the slot in the back of the DVD Writer When you connect the jumper to MA (Master), the drive runs as the master, and when you connect it to SL (Slave), the drive runs as the slave. When you connect it to CS (CSE...
Otros modelos de este manual:lector de DVD - SH-S162L (803.9 kb)