Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Make sure to close all working programs before attempting to open the tray and always use the open/close button. Do not use cracked, distorted or damaged discs. о If the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmlhy) Connecting the S-ATA Power cable • The S-ATA Power cable from the internal power unit of your computer must be connected to the power terminal the rear of the DVD Writer drive. S-ATA Power Port S-ATA Data Port 2 Connecting the S-ATA Data cable Do not insert a pin into the emergency ing while in operation. ж о In particular, a disc with a crack on the inner tracks may break while in use. ж Rear Never allow food particles or foreign substances to enter the drive casing. О To protect against the risk of fire, do ot spill such liquids as alcohol and benzene on the drive. О Do not disassemble, attempt to repair or modify the device without express approval as directed in the manual. • To reduce the risk of damage, electric shock, and fire. BG68-01622A REV.00 Any change or modification not expressly approved by designated qualified personnel could void your authority to operate this device. 1. Check to see that the disc does not have a crack before use. If the disc has a crack (especially around the center hole), it is recommended that you make a copy immediately and use the copy instead. When a cracked disc is used continuously,the sze of the crack is likely to grow and it will eventually result in irreparable damage to the disc. 2. Do not use low quality discs (i.e., illegal products, scratched or - - Important to read and understand at all times Do not disassemble 2 Installing the Drive Using the Drive/Storing and Cleaning Your Discs When using one S-ATA cable System Requirements S-ATA supported PC Using the DVD Writer (The compatible motherboard list can be found from the website) 256Mbytes or above Windows 2000/XP/Vista 1 Push the power button and boot the computer. Installing the DVD Writer When you have one ODD and the other ODD products. How to install the DVD Writer on your PC. First, remove the cover; connect the cable to the DVD Writer and then to the PC. 1 If necessary, attach a horizontal bracket to both sides of the drive. • You can purchase these accessories separately from your computer dealer. (Screws for use: M3 X 6 X 4) 2 3 4 After booting the computer, open the disc partment by pressing the Eject button. Insert the disc (CD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. Play the disc (CD). 2 Remove the plate from a free expansion slot and install the DVD Writer , as shown in the illustration. • If you have no free expansion slot, install the drive in place of the diskette drive. • Make sure to use the standardized screws supplied (M3...
Otros modelos de este manual:lector de DVD - SH-S223B (585.51 kb)
lector de DVD - SH-S223C (585.51 kb)
lector de DVD - SH-S223F (585.51 kb)
lector de DVD - TS-H653F (585.51 kb)