Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
• Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture re-appears. • Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. • When you connect a HDMI or DVI compatible device, make sure of the following: - Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. - The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720X576i(480i), 720X576p(480p), 1280X720p, 1920X1080i or 1920X1080p video input. - The 1080p, 720p and 576p(480p) resolutions are the progressive scan applied resolution • Not all HDCP-compatible DVI devices will work with this unit. - The picture will not be displayed properly with non-HDCP device. 5 DVX583.86KH-SE_1/14/10 1:26 PM Page 6 Remote control 6 abcd • • • • • • • • • • • • • a • • • • • • • • • • • • • POWER ( 1): Switches the unit ON or OFF. OPEN/CLOSE ( Z): Opens and closes the disc tray. Numerical buttons: Selects numbered items in a menu. CLEAR: Removes a track number on the program List or a mark on the Marker Search menu. TV: TV control buttons. • • • • • • • • • • • • • • b • • • • • • • • • • • • • SCAN ( m / M): Search backward or forward. SKIP ( . / > ): Go to previous or next chapter/track/file. PAUSE/STEP ( X): Pauses playback temporarily/press repeatedly for frame-by-frame playback. PLAY (N): Starts playback. STOP (x): Stops playback. • • • • • • • • • • • • • • c • • • • • • • • • • • • • DVD MENU: Accesses or exits the DVD menu. TITLE: Accesses the disc’s title menu, if available. vV b B: Navigates the menus. ENTER ( ) : Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN ( O): Returns to menu or exits the menu. Changes to the USB mode. AUDIO ( ) : Selects an audio language or audio channel. SUBTITLE ( ) : Selects a subtitle language. ANGLE ( ): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • • • • d • • • • • • • • • • • • • MARKER: Marks any point during playback. SEARCH: Displays MARKER SEARCH menu. PROGRAM: Enters the program edit mode. ZOOM: Enlarges video image. REPEAT: Repeats a chapter, track, title or all. A-B: Repeats a section. RESOLUTION: Sets the output resolution for HDMI and COMPONENT/PROGRESSIVE SCAN OUT jack. KARAOKE (ECHO): Accesses or exits KARAOKE menu. Controlling other TV’s with the remote control You can control the sound level, input source, and power switch of your LG TV with the supplied remote control. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table below). Release TV POWER button. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. Manufacturer Code Number LG/GoldStar 1 (Default), 2 Zenith 1, 3, 4 Samsung 6, 7 Sony 8, 9 Hitachi 4 Put the battery into the Remote Control Remove the battery cover on the rear of Remote Control, and insert battery (size AAA) with + and – matched correctly. DVX583.86KH-SE_1/14/10 1:26 PM Page 7 Main Unit abcdefghi a Disc Tray Insert a disc here. b Z (Open / Close) Opens or closes the disc tray. c Display window Shows the current status of the unit. d Remote sensor Point the remote control here. e 1 (Power) Turn the unit ON or OFF. f MIC. Connect a microphone. g VOL. Adjust microphone volume. h • N (Play) Starts playback. • x (Stop) Stops playback. • . (Skip) Returns to the beginning of current chapter/track/file or go to the previous chapter/track/file. • > (Skip) Go to next chapter/track/file. i USB Port Connect an USB Flash Drive. 7 DVX583.86KH-SE_1/14/10 1:26 PM Page 8 Adjust the settings 1 Display setup menu: SETUP 2 Select a desired option on the first level: vv VV 3 Move to second level: BB 4 Select a desired option on the second level: vv VV 5 Move to third level: BB 6 Change the setting: vv VV / ENTER ON REMOTE Adjust the settings - more you can do When you turn on for the first time (optional) The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use bB to select [Enter] then press ENTER. Adjust the language settings Menu Language – Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/ Menu. [Original]: Refers to the original language in which the disc was...