Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
SCART AV Connecting to the AV2 DECODER jack Connect a VCR or similar recording device to the AV2 DECODER jack of this unit. You do not need to turn on the unit to view the signals from the connected tuner on your TV. To watch or record the source from AV2 DECODER jack, set [AV2 Connection] option to [Others] (see page 15) and set [AV2 Recording] option to [Auto], [CVBS], [RGB] or [S-Video] as required (see page 17). • Pictures containing copy protection be recorded. • If you pass the unit signals via the VCR, on your TV screen. Be sure to connect your VCR to the unit and TV in the order shown below. To watch video tapes, watch the tapes through a second your TV. • When you record to a VCR from this unit, do not switch the input source TV by pressing the TV/DVD button on the remote. • If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the AV2 DECODER jack. • If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected VCR or tuner. 11 RH387-P_BUKRLLK-7/16/08 1:27 PM Page 12 Connecting to the AV IN 3 Jacks Connect the input jacks (AV IN 3) on the unit to the audio/video your accessory component using audio/ T/S Connecting a Digital Camcorder Using the front panel DV IN jack, it is possible to connect a DV digital camcorder and digitally transfer DV tapes to DVD. Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this unit. T/S The DV IN jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-VHS video decks. Disconnecting the DV cable while recording a contents of the connected digital camcorder may result in malfunction. Operating USB Flash ON REMOTE 1. Insert an USB Flash Drive to the USB – 2 Displays the HOME menu: HOME 3 Select a main option: [MUSIC], [PHOTO] or [MOVIE] option b bb B BB 4 Select the [USB] option: v vv V VV 5 Displays corresponding menu list: For details of operations on each files, refer to relevant pages. ENTER Using USB Flash Drive - more you can do Using an USB Flash Drive This unit can play the MP3/WMA/JPEG/DivX files contained in the USB Flash Drive. Inserting the USB Flash Drive – Insert straight-in until it fits into place. Removing the USB Flash Drive – Withdraw the USB Flash Drive carefully when the connected USB Flash Drive is in use. Notes on USB Flash Drive • The contents on the disc or HDD cannot be moved or copied to a USB Flash Drive. • Keep the USB Flash Drive out of reach of children. If swallowed, seek medical advice immediately. • This unit supports only USB Flash Drive with FAT16 or FAT32 format. • The USB Flash Drives which require additional software will not be supported. • This unit is compatible with the Flash type USB device that supports USB 1.1. • This unit may not supports some USB Flash Drive. • Do not extract the USB Flash Drive in operating (play, copy, etc.). It may cause a malfunction on this unit. 12 RH387-P_BUKRLLK-7/16/08 1:27 PM Page 13 Auto setup When the first time to turn on the unit, the wizard sets the language, clock and channels 1 Turn on the unit: The initial setup wizard appears on the screen. automatically. POWER ON REMOTE 2 Choose a language: v vv V VV 3 Select the chosen language: ENTER 4 Check the antenna and go to the next step: ENTER 5 Set the clock: v vv V VV b bb B BB , ENTER 6 Select the [Start] and starts channel scan: ENTER 7 Close the initial setup: ENTER Auto setup - more you can do Adjust the programmed channels Press HOME, then use b bbB BB to select [Easy Menu] option. Press ENTER while [SETUP] is selected. The SETUP menu appears on the screen. Select the [Program Edit] on the second level options then press B BB to move to the third level. Press ENTER while [Edit] option is selected. The channel editing screen appears on the screen. Select which channel you would like to edit and press ENTER. An option menu on the left side of the screen will be highlighted. [Delete]: Delete the selected channel [Move]: Change the order of the channels correspond to. [Station Rename]: change a name of the [Program Edit]: Change the settings of a channel Editing a channel You can change the settings of programmed channel Edit] option on the left side of the channel editing screen. [PR]: Indicates the selected channel position. [Seek]: Searches for a channel automatically. Searching stops when the unit tunes in a channel. [Ch.] Changes the channel number. [MFT] Fine tunes the channel to obtain a clearer picture. [CANAL]: Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal plus programs. [NICAM]: Sets the channels for the NICAM broadcast. [OK]: Confirm the settings and return to the channel list menu. Setting the AV1 Decoder Sets the AV1 scart jack for inputting encoded video signals. This option sets the unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart jack for decoding. The decoded signal is the...