Votos - 3, Puntuación media: 4.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
DVD-SURROUND-PROZESSOR BEDIENUNGSANLEITUNG 5.1 kan DVD-SURROUNDPROCESSOR GEBRUIKSAANWIJZING 5.1 canale DVD SURROUND PROCESSOR ISTRUZIONI PER L’USO PROCESADOR SURROUND DVD de 5.1 canales MANUAL DE INSTRUCCIONES 5.1 dvd aataass 5.1 ^ dvd KENWOOD CORPORATION DIGITAL nn I DOLBY I DIGITAL SURROUND © PRINTED IN JAPAN B64-1781-00/01 (W) Installation Connecting Cables to Terminals (MZ-BUS connection) (Black) Optical cable (6m:Accessory ®) 2-English (front side) |acaution| When handling an optical cable for wiring, use care not to exceed the minimum cable bend radius of 30 mm. If you exceed the minimum bend limit, optical fibers within the optical cable may be damaged. When installing the DVD player unit on the vehicle, ensure that the optical cable is not stuck between the DVD player unit and vehicle parts. ACAUTION| Set the PROTOCOL SWITCH to the "BUS" side. After the PROTOCOL SWITCH is switched, be sure to reset the control unit. Don't connect anything to the "TO OTHER HEAD UNIT" terminal. PROTOCOL SWITCH BUS ----- OTHER Optical cable (Provided with the C929) Leave the output terminals on the receiver unit open. r~ r~ ~r~ (xnv) T "I"!"! z 3NH 13NH dvaid iNOdd Mans Z 3|"jn V apn dV^d iNOdd d3XN30 KDS-P901 (rear side) Subwoofer preout Center Speaker preout Front left output (white) Front right output (red) Rear left output (white) Rear right output (red) Left input 1 (white) Right input 1 (red) Left input 2 (white) Right input 2 (red) English-3 Installation Connecting Cables to Terminals (Other connections) |note| Leave the output terminals on the receiver unit open. Set the PROTOCOL SWITCH to the "OTHER1 side. After the PROTOCOL SWITCH is switched, be sure to reset the control unit. The BUS cable unit can't be connected. PROTOCOL SWITCH BUS ----- OTHER DVD Receiver unit: Z910DVD,Z920DVD,KDV-Z930,KDV-Z940,KDV-Z960 4-English V Optical cable (6m:Accessory ®) KDS-P901 KENWOOD ““Ti N \ loi |S| +* / • . I —I \ (Green) (front side) (rear side) |ACAUTION| When handling an optical cable for wiring, use care not to exceed the minimum cable bend radius of 30 mm. If you exceed the minimum bend limit, optical fibers within the optical cable may be damaged. When installing the DVD receiver unit on the vehicle, ensure that the optical cable is not stuck between the DVD receiver unit and vehicle parts. Do not remove the protection caps of the unused BUS terminals. Protection cap (xnv) T "I Z 3NH I- 3Nn u a Z 3NH I- 3NH XNOdd bl3XN30 KDS-P901 (rear side) Subwoofer preout Center Speaker preout Front left output (white) Front right output (red) Rear left output (white) Rear right output (red) Left input 1 (white) Right input 1 (red) Left input 2 (white) Right input 2 (red) NOTE English-5 Installation Installation ■ Securing to audio board 1 Remove the caution sticker and fasten the installation brackets on the both sides of the KDS-P901 using the sems screws (M4 x 8 mm). | 2CAUTION | Use the supplied screws for installing the KDS-P901. Using any other screw may cause the equipment to improperly function. 2 Use the tapping screw (04X16mm) to secure the hideaway unit to the audio board. Sems bolts (M4X8mm) Installation (Accessory®) ■ Securing to pile carpet Peel the protective strips off of the velcro strips, attach them to the bottom of the hideaway unit, and secure to the pile carpet. | 2CAUTION | Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could lead to injury or accident should the unit come off due to a shock and strike a person or an important component. Tapping screws should be used for mounting. (Attachment with velcro strips, although easy, can come off with a shock.) Velcro strips (Accessory®) 6-English Accessories External view External view Number of items r © © 2CAUTION Number of items External view u i Number of items The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Specification Specifications subject to change without notice. DSP section D/A Converter...............................................................................................................................................24 Bit A/D Converter...............................................................................................................................................24 Bit Decorder..................................................................................Linear PCM / Dolby Pro Logic / Dolby digital / DTS Equalizer 4BAND Parametric equalizer BAND1 frequency :...........................................60/80/100/120/160/200/250 Hz BAND2 frequency :................................................315/400/500/630/800/1k Hz BAND3 frequency :...........................................1.25k/1.6k/2k/2.5k/3.15k/4k Hz BAND4 frequency :..........