Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Within about 7 m (23 feet) 30°30° Notes on the remote control • Direct the remote control at the remote sensor of the DVD video player. • Do not drop or give the remote control a shock. • Do not leave the remote control near an extremely hot or humid place. • Do not spill water or put anything wet on the remote control. • Do not open the remote control. 15 Connections Read this chapter first to make all necessary preparations. Connecting to a TV Connections Read this chapter first to make all necessary preparations. Connecting to a TV Connecting to an audio system and TV equipped with component video inputs Connecting to an amplifier equipped with a Dolby Digital decoder Connecting to an amplifier equipped with Dolby Pro Logic Surround Connecting to an amplifier equipped with a DTS decoder Connecting to an amplifier equipped with an MPEG2 audio decoder Connecting to an amplifier equipped with a digital audio input Connections Connections Connecting to a TV Connect the DVD video player to your TV. For details of output sound, see 43 . Connecting to a TV Signal flow OUT (white) BITSTREAM/PCM L COAXIAL OPTICAL ANALOG R VIDEO Y PB PR S AUDIO OUTVIDEO OUT To S VIDEO To VIDEO OUT To ANALOG AUDIO OUT (red) (white)(yellow) To wall outlet To video input (yellow) (red) To S video input Audio/video cable (supplied) S video cable (not supplied) To audio inputs If the TV has an S video input, connect the DVD video player with an S video cable. When using an S video cable, do not connect the yellow video cable. TV or monitor with audio/video inputs • Make the following setting. On-screen display Select: Page “Audio Out Select” “Analog 2ch” 48 50 Notes • Refer to the owner’s manual of the connected TV as well. • When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. • If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable adapter (not supplied) and then connect to your TV. • Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected. 18 Connecting to an audio system and TV equipped with component video inputs Signal flow BITSTREAM/PCM L COAXIAL OPTICAL ANALOG R VIDEO Y PB PR S AUDIO OUTVIDEO OUT To PR VIDEO OUT To wall outlet To audio inputs of the amplifier (red) (white) (red) (white) To Y VIDEO OUT To PB VIDEO OUT To Y video input To PB video input To PR video input To ANALOG AUDIO OUT Connections Audio system Component video (ColorStream®) outputs/inputs Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. TV or monitor with component video inputs • Make the following setting. On-screen display Select: Page “Analog 2ch” “Audio Out Select” 48 50 Notes • Refer to the owner’s manual of the connected equipment as well. • When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video player away from the tuner and radio. • The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged. 19 Connections Connections Connecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment. • For connection to your TV, see “Connecting to a TV” . 18 19 • For details of output sound, see 43 . • This section uses the following reference marks. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Warning • When you are connecting (via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the on-screen displays 48 Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks. To avoid possible damage to the audio system, you should take proper precautions...
Otros modelos de este manual:lector de DVD - SD-2800U (1.32 mb)