Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Toshiba Tamaño del archivo: 7.27 mb Nombre del archivo: Idioma del manual:

DATE START END LINE WKL-WE To set daily/weekly timer To confirm or cancel a program If the programs overlap another Do not overlap timer programs as portions of theconflicting programs will be lost. The first recordingtime has priority over the next recording time as shownin the diagram below. If you set up many timer recording programs at the same start time, the priority will be the top program in the timer recording list. 8 : 00 11 : 00 9 : 00 10 : 00 Program 1 Prog.1 Deleted Parts Non Recorded Portion Parts Prog.2 Prog.3 Program 2 Program 3 RecordingControl Settings 1 If the Timer has been activated, press TIMER REC to deactivate the Timer. The timer symbol ( ) will disappear. Then press VCR DVD selector to change to VCR mode. 2 To confirm Timer program: At step 1 on page 28 select “TIMER REC SET” and press ENTER. The timer program list will appear on the screen. .+/–/ENTER/CANCEL/MENU. DATE START END LINE 26(SU) 11:00PM 11:30PM SLPL1 3 To cancel Timer program: Press SET + or – to select the unwanted program, then press CANCEL to cancel the program. .+/–/ENTER/CANCEL/MENU . DATE START END LINE –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– – – – – – – – – 4 Press VCR MENU repeatedly until the menu screen is cleared. Notes: If there are other timer record programs remaining, TIMER REC must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored. • Notes: • You cannot confirm the Timer program during timer recording • The daily/weekly recording can be made continuously until operation. the recording is canceled or the tape reaches the end.• You can correct or cancel a programmed setting in program • During timer recording, the automatic rewinding mechanism confirm mode. does not function. 29 Other functions (VCR) Other functions (VCR) Audio output selection/ Recording a DVD/CD disc SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi stereo position, this button can be set to the MONO positionif the stereo broadcast or videotape audio is of poor quality. The “R” and “L” positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SELECTION SOUND HEARD ON BOTH SPEAKERS STEREO STEREO L ch LEFT CHANNEL AUDIO R ch RIGHT CHANNEL AUDIO MONO MONO Duplicating a DVD or CD disc Audio output selection When playing a prerecorded VHS Hi-Fi stereo videotape, press AUDIO VCR DVD STOP PLAY SP/SLPREC/OTR AUDIO SELECT You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR. Preparation: Turn ON the TV and select the corresponding video input. Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) Load a cassette tape with the erase prevention tab intact. Load a DVD/CD disc. • • • • 1 Press SP/SLP to select the desired tape speed SP or SLP. 00 : 00 : 00 SP 2 Press VCR DVD selector to select the DVD mode. The DVD mode indicator will light. 3 Press PLAY to start playback. 4 Press REC/OTR to start recording. The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape. 5 Press STOP when you finish recording. If you wish to stop a DVD/CD disc, press VCR DVD selector to change theDVD mode, then press STOP. Notes: • You may not be able to record the beginning of the disc. Begin VCR recording once program playback commences on the DVD. • When the scanning mode is set to the progressive mode, you cannot duplicate a disc material onto a video tape. When REC/OTR is pressed, the PROGRESSIVE indicator “ ” on the display window will flash. • You cannot record discs encoded with copy guard function. The following icon and text will show up on the TV screen. DISC IS COPY PROTECTED 30 Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate apreviously recorded tape. Make all connections before turning on the power. Duplicating a video tape Preparation: • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (TheVCR mode indicator will light.) • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. 1 1 Press SP/SLP to select the desired tape speedSP or SLP. It is recommended to set the tapespeed to the SP mode on therecording VCR for best results. 2 2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position. “L1” or “L2” will appear on the display. L1: on the rear panel L2: on the front panel 3 3 Press PLAY on the playback VCR or Camcorder. 4 4 Press REC/OTR on the recording VCR. The duplicating process begins....

Descargar ahora

Introduzca dos números de la imagen: