Votos - , Puntuación media: ( )

Manual de usuario Toshiba, modelo SD-V393SU

Fabricar: Toshiba
Tamaño del archivo: 3.36 mb
Nombre del archivo:

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

Find the type of antenna system you are using and follow the connection diagram. 1 1 Combination VHF/UHF Antenna with 75 ohm Coaxial Cable DVD/VCR OUT (TV) IN (ANT) 75 ohm Coaxial Cable 2 2 Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire DVD/VCR OUT (TV) IN (ANT) 300 ohm Twin Lead (Flat) Wire Matching Transformer 300 ohm Input 75 ohm output (not supplied) (not supplied) Separate VHF and UHF Antennas DVD/VCR OUT (TV) IN (ANT) VHF UHF 300 ohm Twin Lead (Flat) Wire (not supplied) 75 ohm Coaxial Cable Combiner 75/300 ohm Inputs 75 ohm output (not supplied) 3 Note: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and one 75 ohm output. Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to the DVD/VCR properly. • For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type antenna is required. • If you are not sure about the connection, please refer to qualified service personnel. 14 2H20101A (E)p14-17 14 2/10/05, 7:31 PM DVD/VCR to TV connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception. Connections TV VHF/UHF IN 75 ohm Coaxial Cable (supplied) TV Splitter 75 ohm Input 75/300 ohm outputs 75 ohm Coaxial Cable (not supplied) (supplied) UHF VHF TV UHF VHF Splitter 75 ohm Input 300 ohm outputs 75 ohm Coaxial Cable (not supplied) (supplied) Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. TV with single 75 ohm VHF/UHF antenna input Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. TV with 300 ohm UHF and 75 ohm VHF antenna inputs Note: If a VHF or UHF antenna is used, set the TV/CABLE menu option to the “TV” mode. TV with 300 ohm UHF and 300 ohm VHF antenna inputs 15 2H20101A (E)p14-17 15 2/10/05, 7:32 PM Connections Connections Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a premium channel which is scrambled, you must have a descrambler box for proper reception. VHF/UHF IN (ANT) OUT (TV) IN (ANT) VHF/UHF IN (ANT) OUT (TV) IN (ANT) VHF/UHF IN (ANT) OUT (TV) IN (ANT) Allows: * Recording of nonscrambled channels. * Use of the programmable timer. * Recording of one channel while watching another. Allows: * Recording of channels through the converter box (scrambled and unscrambled). * Using the programmable timer to record only the channel selected at the converter box. Prevents: * Recording one channel while watching another. * Using the DVD/VCR tuner to select channels. DVD/VCR Incoming Cable TV Converter/ Descrambler Incoming Cable TV TV Note: To record from converter/descrambler, DVD/ VCR tuner must be tuned to the converter output channel, usually channel 3 or 4. DVD/VCR DVD/VCR Incoming Cable Converter/Descrambler Allows: * Recording of nonscrambled channels. * Use of the programmable timer. * Recording an unscrambled channel while watching any channel selected at the converter box. Prevents: Recording scrambled channels. Note: If you are playing a tape or using the tuner built into the DVD/VCR, the converter must be set to the video channel output of the DVD/ VCR (either 3 or 4). 1 2 3 Note: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output of the Converter/Descrambler box, usually channel 3 or 4. 16 2H20101A (E)p14-17 16 2/10/05, 7:32 PM IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection. Connections VHF/UHF IN (ANT) A B OUT (TV) IN (ANT) VHF/UHF IN (ANT) A B OUT (TV) IN (ANT) Incoming Cable Allows: * Recording of one channel while watching another. * Using the programmable timer to record only the channel selected at the converter box. * Recording of all channels through the converter box. Prevents: * Watching scrambled channels while recordin...