Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
– Connect the DVD system directly to the TV. – RGB connection will let you use the features of both the Audio and Video in the DVD Player. Using SCART jack . Use the SCART cable (black) to connect the DVD Player’s SCART jack (AV) to the corresponding Scart input jacks on the TV (cable supplied). Helpful Hint: – Ensure that the “TV” indication on SCART cable is connected to the TV set and “DVD” indication on SCART cable is connected to the DVD Player. 01-41 DVP900_00A31 9 IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV. – Connect the DVD Player directly to the TV. Using Composite Video jack (CVBS) 1 Use the supplied composite video cable (yellow) to connect the DVD Player’s yellow VIDEO OUT (CVBS) jack to the VIDEO IN jack (labeled as Video In, Composite, CVBS, or Baseband) on the TV (cable not supplied). 2 Set the SCAN MODE switch to INTERLACE. 3 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied). 9 /00_3139 246 13873 13/01/2005, 09:57 Connections English S-VIDEO YPbPr MIXED 2CH MAIN CENTER SUB WOOFER 6CH DISCRETE L L R COMPONENT SCAN MODE INTERLACE PROGRESSIVE VIDEO VIDEO OUT PCM / DIGITAL/ DTS / MPEG COAXIAL OPTICAL DIGITAL OUT R AUDIO OUT AV AUDIO IN Pr/Cr Pb/Cb Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN AUDIO IN Pr/Cr Pb/Cb Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN IN IN 31 2 Back of TV S-VIDEO YPbPr MIXED 2CH MAIN CENTER SUB WOOFER 6CH DISCRETE SURROU L L R COMPONENT SCAN MODE INTERLACE PROGRESSIVE VIDEO VIDEO OUT PCM / DIGITAL/ DTS / MPEG COAXIAL OPTICAL DIGITAL OUT R AUDIO OUT AV AUDIO IN Pr/Cr Pb/Cb Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN AUDIO IN Pr/Cr Pb/Cb Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN IN IN 2 Back of TV IMPORTANT! – S-Video provides better picture quality.This option must be available on your TV. Using S-Video jack 1 Use the S-video cable to connect the DVD Player’s S-VIDEO OUT jack to the S-Video in jack (labeled as Y/C or S-VHS) on the TV (cable not supplied). 2 Set the SCAN MODE switch to INTERLACE. 3 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied). 10 01-41 DVP900_00A31 10 IMPORTANT! – The progressive scan video quality is only possible when using Y Pb Pr and a progressive scan TV is required. – DO NOT connect both video and Y Pb Pr to a TV, it may affect the picture quality. Using Component Video jacks (Pr Pb Y) 1 Use the component video cables (yellow, red, white) to connect the DVD Player’s Pr Pb Y jacks to the corresponding Component video in jacks (labeled as Pr / Cr Pb / Cb Y or YUV) on the TV (cable not supplied). 2 Set the SCAN MODE switch to PROGRESSIVE. 3 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied). /00_3139 246 13873 13/01/2005, 09:57 Connections English S-VIDEO YPbPr COMPONENT SCAN MODE INTERLACE PROGRESSIVE VIDEO VIDEO OUT HDMI / COAXIA DIG AV S-VIDEO YPbPr MIXED 2CH MAIN CENTER SUB WOOFER 6CH DISCRETE SURROUND L L R L R COMPONENTCE SIVE VIDEO VIDEO OUT PCM / DIGITAL/ DTS / MPEG COAXIAL OPTICAL DIGITAL OUT R AUDIO OUT ~ AC MAINS AV AUDIO IN R L VIDEO IN TO TVANT IN CH3 CH4 3 1 2 4 ANT INRF coaxial cable to TV Back of RF Modulator (example only) Antenna or Cable TV signal Scan Mode (Progressive/Interlace selector) This switch will change the type of signal output from the Component Video Out on the DVD player. Interlace: Select this setting when connected to a standard (interlace format) TV. Progressive: Select progressive when you have a TV that can accept progressive signals (480/ 525p) to enjoy accurate colour reproduction and high quality images. Helpful hints: – During Progressive mode, 4:3 aspect images are distorted when TV Shape is set to ‘16:9’ . Change the TV screen’s aspect ratio settings to AUTO to avoid image distortion. (see page 31 “4:3 Aspect”). – Some TVs and projectors are not compatible with this DVD Player. If picture distorted during progressive signals, switch the SCAN MODE to Interlace. 01-41 DVP900_00A31 11 IMPORTANT! – If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. The RF modulator is not supplied with the DVD Player. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator 1 Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to the video input jack on the RF modulator. 2 Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack. 11 /00_3139 246 13873 13/01/2005, 09:57 Conne...