Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Please follow indication from the Teletext screen. 6Additional Functions 6.1 DISPLAY Menu Selection display to adjust the brightness with 1 2. to adjust the color with 1 2. to adjust the screen of 16:9 or 4:3 with 1 2. 6.2 Connection 6.2.1 Headphone Connect the headphone to either one of the headphone jacks on the side of the player. 6.2.2 TV You can connect the player to a TV and enjoy your DVD. White Red Yellow 6.2.3 AV input You can connect to other devices such as Digital Video Recorder, Digital Camera, etc. White Red Yellow The video input devices, such as video amplifier, digital video recorder, digital camera should have the RCA output connec- tion on the device. If your device does not have the RCA out- put, please consult your dealer. 6.2.4 USB You can plug in the USB flash drive to view the stored pictures and video. 1 After plug in the USB flash drive, the DVD player will browse the content of your USB drive automatically. 2 See section 5.8 Playback from USB for playback details. 3 Unplug the USB drive after enjoyment. This will also deactivate the USB browser function. 6.2.5 Coaxial It provides digital audio output signal that you can connect to your home theater equipment to decode the digital audio signal. Yellow 6.2.6 SD/MMC card slot You can play video/audio/picture files stored on an SD/MMC card by inserting it into the SD/MMC CARD slot. TIP Make sure the metal contact of the card to be inserted is facing down. 6.2.7 Component Video and S Video Component Video(YPbPr/YCbCr) • On the remote control, press SOURCE to select component video mode in the pop-up menu. •To exit the component video mode, press SOURCE. IMPORTANT! – Component Video connection provides higher picture quality. This option must be available on your TV. White Red S Video To use S Video, connect as illustrated below. White Red 6.2.8 TV antenna You can connect to the home antenna to receive free to air digital TV program. 7. Troubleshooting If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. If a fault occurs, first check the points listed, before taking the set for repair. If you are unable to solve a problem by follow- ing these hints, consult your dealer or service centre. Symptom Remedy No power • Check if both plugs of the mains cord are properly connected. • Check if there is power at the AC outlet by plugging in another appliance. • Check if car adaptor is connected appropriately. Distorted picture • Check the disc for fingerprints and clean with a soft cloth, wiping from centre to edge. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. Completely distorted picture / no colour in the TV screen The NTSC/PAL setting may be in the wrong status. Match your TV’s setting with the player’s setting. No sound Check audio connections. If using a HiFi amplifier, try another sound source. Disc can’t be played • Ensure the disc label is upwards. • Clean the disc. • Check if the disc is defective by trying another disc. The player does not respond to the remote control Aim the remote control directly at the sensor on the front of the player. Avoid all obstacles that may interfere with the signal path. Inspect or replace the batteries. Distorted or B/W picture with DVD Use only discs formatted according to the TV-set used (PAL/NTSC). Loss of current TV 1 Press SETUP > TV & RADIO > programs when travel-Country ling to another country 2 Select your country 3 Select Auto search No audio at digital output • Check the digital connections. Player does not • Operations are not permitted by the respond to all operatdisc. ing commands during • Refer to the instructions in the disc playback inlay. Cannot detect USB plug-in • Unplug the USB connection and plug-in again. Detection may take some time that vary with the capacity of your USB device. • The DVD player only support Mass Storage (MSC) format from USB flash drive. • The DVD player does not support Hard Disk storage or Media Transfer Protocol (MTP) format. Cannot switch to AV-in or no signal • Unplug the AV-in connection and plug-in again. • Check the connection from the AV output device, such as digital camera, video recorder, etc. • Use the provided AV cable for connection. Switch between •DVD mode is default source during the DVD/USB/AV-in DVD player power on. • Plug in USB will activate USB mode. Deactivate it by unplug the connection. • Plug in AV-in will activate AV-in mode. And deactivate it by unplugging the connection. • Do not plug-in USB & AV-in at the same time. Plug-in one type connection at a time only. • Unplug the connection before you plug-in another connection. Player feels warm When the player is in use for a long period of time, the surface will be heated. This is normal. Display goes dimmer when AC is unplugged The unit is saving power to ensure...