Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
4.5 hours • DVD continuous playing time is a reference indicating the maximum playing time at average speaker volume. • The playback time may be shortened depending on the disc, surrounding temperature, battery pack conditions, and speaker volume. ENGLISH 25 26 ENGLISH Using the battery pack Important! • When inserting the battery pack, make sure that it is inserted correctly. Otherwise, your DVD player may malfunction. Use the AC adapter (included) to charge the battery pack. • Before charging, make sure that the battery pack is correctly seated. 1. Connect the AC cord to the jack on the AC adapter ( ). 2. Connect the DC cord to the DC IN jack on the left side of the DVD player ( ). 3. Plug the other end of the AC cord into an AC outlet ( ). Charging the battery pack Power Charge Lamp -Green light will flash while charging. -When the battery pack is fully charged, the light will stop blinking and remains green. 2 ENGLISH Using the battery pack Important! • When inserting the battery pack, make sure that it is inserted correctly. Otherwise, your DVD player may malfunction. Use the AC adapter (included) to charge the battery pack. • Before charging, make sure that the battery pack is correctly seated. 1. Connect the AC cord to the jack on the AC adapter ( ). 2. Connect the DC cord to the DC IN jack on the left side of the DVD player ( ). 3. Plug the other end of the AC cord into an AC outlet ( ). Charging the battery pack Power Charge Lamp -Green light will flash while charging. -When the battery pack is fully charged, the light will stop blinking and remains green. 2 Blinking time Charging rate Once per second Less than 50% Twice per second 50%~75% Three times per second 75%~90% Blinking stops and stays on 90%~100% On for a second and Error-Reset the battery pack and off for a second the DC cable 2 1 3 Battery level display • The battery level display indicates the amount of power remaining in the battery pack. a. Fully charged b. 20~40% used c. 40~80% used d. Completely used (flickers) (The DVD will turn off soon, change the battery as soon as possible) . The playing time is affected by environmental temperature and conditions. The playing time becomes very short in a cold environment. The continuous playing times in the operating instructions are measured using a fully charged battery pack at 25°C. As the environmental temperature and conditions may differ when you actually use the DVD, the remaining battery time may not be the same as the approximate continuous playing times given in these instructions. NOTE: NOTE:NOTE: • When the operation time is noticeably shorter than normal, it is time to buy a new battery. The battery level display time changes depending on the battery operating time. • As the battery is completely used, the noise screen intermittently can be displayed. ...........................a ...........................b ...........................c ...........................d ENGLISH 27 28 ENGLISH Playing a Disc After plugging in the player, the first time you press the POWER button, this screen comes up: Press the UP/DOWN buttons to select the language, and then press the ENTER button. (This screen will only appear the very first time you plug in the player.) 1. Press the OPEN button to open the disc lid. • The disc lid opens up to around a 60-degree angle. Do not attempt to open the lid to an angle beyond this range. The lid may become damaged. 2. Place a disc gently into the tray. • You should hear and feel the disc snap firmly into place. Caution • Place a disc into the tray with the disc’s label facing up. 3. Close the disc lid and then press the part marked “PUSH” until it clicks shut. 4. Stopping Play • Press the STOP ( 5. Pausing Play Press the PAUSE ( -Screen stops, no sound. - To resume again, press PLAY ( Before Play Play ) button during play. ) button on the remote during play. ) button once again. ENGLISH Playing a Disc 6. Step Motion Play (Except CD) Press the PAUSE ( )/STEP button on the remote during play. -Each time the button is pressed, a new frame will appear. -No sound is heard during STEP mode. -Press PLAY ( ) to resume normal play. (You can only perform step motion play in the forward direction.) 7. Slow Motion Play (Except CD) Press the button on the remote during PAUSE or STEP mode. By pressing the button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed. Press and hold the button to choose the play speed between 1/8X, 1/4X and 1/2X of normal during PAUSE or STEP mode. -No sound is heard during slow mode. -Press PLAY ( ) to resume normal play. NOTE: NOTE:NOTE: Reverse slow motion play will not work. RESUME function When you stop disc play, the player remembers where you stopped, so when you press PLAY ( ) again, it will pick up where you left off. (unless the disc is removed, the STOP ( ) button is pressed twice or the player is unplugged.) Important! • Make sure that the disc is correctly placed. Otherwise, the disc and/or the DVD player may be d...