Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Turn on the equipment connected with the audio cable. • The [AUDIO] options are set to the wrong position. • Set the [AUDIO] options to the correct position (see page 20). The player does not start playback. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type and regional code.) • The rating level is set. • Change the rating level. BD-Live feature does not work. • External USB device is not connected. • Connect a FAT16 or FAT32 formatted USB device to the USB port (see page 9). • Internet connection is not established. • Ensure that the unit is correctly connected to the local area network and can access the internet (see page 16). The Remote Control does not work properly. • The Remote Control is not pointed at the remote sensor on the player. • Point the Remote Control at the remote sensor of the player. • The Remote Control is too far from the player. • Operate the Remote Control closer to the player. Resetting the Player If you observe any of the following symptoms... When the Player is plugged in, but the power will not turn on or off. When the display window is not working. When the Player does not operate normally. You can reset the Player as follows: Press and hold the POWER button for more than five seconds. This will force the Player to power off. Press the POWER button again to turn the Player back on. Unplug the power cord and then plug the power cord again after more than five seconds. Customer Support You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit or contact LG Electronics customer care centre. Specifications General Power requirements: AC 200-240 V~, 50/60 Hz Power consumption: 26W Dimensions (W x H x D): Approx. 430 x 58 x 277 mm (16.9 x 2.3 x 10.9 inches) without foot Net Weight (Approx.): 3 kg Operating temperature: 5 °C to 35 °C Operating humidity: 5 % to 90 % Outputs VIDEO OUT: 1.0 V (p-p), 75 ., sync negative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 ., sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 ., RCA jack x 2 HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) ANALOGUE AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 ., RCA jack (L, R) x 1 DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 ., RCA jack x 1 DIGITAL OUT (OPTICAL): 3 V (p-p), Optical jack x 1 System Laser: Semiconductor laser, wavelength: 405nm / 650 nm Signal system: Standard PAL/NTSC colour TV system Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio: More than 100 dB (ANALOGUE OUT connectors only) Harmonic distortion: Less than 0.008% Dynamic range: More than 95 dB LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX Accessories: Video cable (1) Audio cable (1) Remote control (1) Batteries (2) Note: Design and specifications are subject to change without prior notice. 38 39 Reference The unit’s Audio Output Specifications Notes: *1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. *3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option and [DTS re-encode] setting of the [SPDIF] option cannot be set together. If you set the [HDMI] option to [PCM Multi-CH] or [Primary Pass-Thru], the [SPDIF] option is set to [PCM Stereo] automatically. Also, if you set the [SPDIF] option to [DTS Re-encode] and the [HDMI] option is set to [PCM Stereo] automatically. *4 The LPCM audio recorded at 192kHz sampling frequency will be outputted as stereo sound. *5 On the PCM audio output, the sampling frequency of HDMI/SPDIF (DIGITAL AUDIO OUT) is limited to 96 kHz. *6 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1 ch. If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs, and the original audio is outputted for the other discs (like [Primary Pass-Thru]). • If [HDMI] option is set to [PCM Multi-CH] and [SPDIF] option is set to [Primary Pass-Thru] when the unit plays back Dolby Digital Plus audio, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM 2ch”. • If the HDMI connection is version 1.3 and Dolby Digital Plus/Dolby TrueHD/DTS-HD is outputted from HDMI OUT jack, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM 2ch” (When the HDMI and SPDIF are connected simultaneously). • The audio is always output as PCM 48kHz/16 bit during Audio CD or MP3/WMA file is playing back. • The Dolby TrueHD audio recorded on the BD disc is consist of Dolby Digital and TrueHD audio. The Dolby Digital audio is outputted through DIGITAL AUDIO OUT jacks ...