Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Plug the power cord into the wall outlet securely. The battery is discharged. Recharge the battery. No disc is inserted. Insert a disc. The TV is not set to receive the signal from the unit. Select the appropriate video input mode on the TV. The video cable is not connected securely. Connect the video cable securely. The channel is not found or stored. Check your antenna connection. The equipment connected with the audio cable is not set to receive the signal from the unit. Select the correct input mode of the audio amplifier. The volume is set to minimum. Use the volume controller to adjust the volume. The AUDIO options are set to the wrong position. Set the AUDIO settings to the correct position. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control is not pointed at the remote sensor on the unit. Point the remote control at the remote sensor of the unit. The remote control is too far from the unit. Operate the remote control closer to the unit. Troubleshooting Symptom Cause Correction The power cord is disconnected. Plug the power cord into the wall outlet securely. The battery is discharged. Recharge the battery. No disc is inserted. Insert a disc. The TV is not set to receive the signal from the unit. Select the appropriate video input mode on the TV. The video cable is not connected securely. Connect the video cable securely. The channel is not found or stored. Check your antenna connection. The equipment connected with the audio cable is not set to receive the signal from the unit. Select the correct input mode of the audio amplifier. The volume is set to minimum. Use the volume controller to adjust the volume. The AUDIO options are set to the wrong position. Set the AUDIO settings to the correct position. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control is not pointed at the remote sensor on the unit. Point the remote control at the remote sensor of the unit. The remote control is too far from the unit. Operate the remote control closer to the unit. Troubleshooting Symptom Cause Correction No power. The power is on, but the unit does not work. No picture. No sound. The unit does not start playback. The remote control does not work properly. Specifications General Power requirements DC 9V Power consumption 12W External Dimensions 202 x 41 x 168 mm (W x H x D) Net Weight (Approx.) 0.78kg Operating temperature: 5 °C to 40 °C Operating humidity 5 % to 90 % Laser Semiconductor laser TV system DVB-T Standard Compliant Signal system PAL Connectors Audio/Video Output o3.5mm mini jack x 1 - Video: 1.0 V (p-p), 75 ., sync negative - Audio: 1.5 Vrms (1 KHz, 0 dB) Earphone terminal o3.5mm stereo mini jack x 2 USB IN 4 pin (USB 2.0 / 1.1 standard) ANTENNA IN Antenna input, 75 .Liquid Crystal Display Panel size 7 inches wide (diagonal) Projection system R.G.B. stripe Driving system TFT active matrix Resolution 480 x 234 (WQVGA) Accessories • Audio/Video adapter • AC Adapter (IM090WU-150B) • Automotive Adapter (Cu-2993) • External antenna • RF cable hub • Remote Control • Battery for Remote Control (Lithium Battery) • Carrying Bag • Headrest Mounting Bracket Designs and specifications are subject without prior notice. 19 Enjoying in a car with the Headrest Mounting Bracket You can enjoy video in the back seat attaching the unit to the back of the front seat. Warnings • The driver must not operate this unit while the vehicle is moving. Do not operate this unit where it can be viewed by the driver. Driver operation or viewing of this unit while the vehicle is moving will cause distraction which may result in serious accident and personal injury or property damage. • Do not attach or detach while driving, and do not attach in the following locations, otherwise it may result in injury or traffic accidents: – anywhere other than the back of the seat – in a location that interferes with the driver . s view or operation of the car – in a location that interferes with the operation of an airbag – in a location that interferes with the driving instruments. • Depending on the type of headrest, you may not be able to attach the bracket. 22 cm or less Headrest Mounting Bracket a Fixing Screw Fixes the unit on the bracket. b Tilt Fixing Screw Fixes a tilt angle of the bracket. c Horizontal Fixing Screw Fixes a horizontal angle of the bracket. d Release knob Press both knobs to release the bracket body from the cradle. e Headrest Mounting Cradle Installation a Separate the headrest. (Refer to your car . s user guide.) b Install the headrest mount cradle as shown in the figure. Note: If you may not be able to install the headrest cradle because of the pipe thickness of your headrest, extend the headrest cradle loosing its screws and install it. c Put the unit on the bracket and fix it using the fixing sc...