Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
yyMovie, music and photo files can be played. For details of operations on each file, refer to relevant pages. yyRegular back up is recommended to prevent data loss. yyIf you use a USB extension cable, USB HUB, USB Multi-reader, or External HDD, the USB device may not be recognized. yySome USB device may not work with this unit. yyDigital camera and mobile phone are not supported. yyUSB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. Remote Control • • • • • • • • • • a• • • • • • • • • • • POWER (1): Switches the unit ON or OFF. OPEN/CLOSE (B): Opens and closes the disc tray. Numerical buttons: Selects numbered items in a menu. CLEAR: Removes a track number on the Program List or the Marker Search menu. TV Control Buttons: Control the sound volume, channel, sources, and power On/Off on TV. • • • • • • • • • • b• • • • • • • • • • • SCAN (c/v): Searches backward or forward. SKIP (C/V): Goes to the next or previous chapter / track / file. PAUSE/STEP (M): Pauses playback. PLAY (z): Starts playback. STOP (Z): Stops playback. • • • • • • • • • • c• • • • • • • • • • • DVD MENU: Accesses or exits the DVD menu. TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • d• • • • • • • • • • • MARKER: Marks any point during playback. SEARCH: Displays MARKER SEARCH menu. PROGRAM: Enters the program edit mode. ZOOM: Enlarges video image. REPEAT: Repeats a chapter, track, title or all. A-B: Repeats a section. RESOLUTION: Sets the output resolution for HDMI OUTPUT jack. ?: This button is not available. Battery Installation Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 4 and 5 matched correctly. Code number to control TVs While holding down TV POWER button, press the number buttons to select the Maker code for your TV (see the table below). Release TV POWER button. Maker Code Number LG 1(Default), 2 Zenith 1, 3, 4 GoldStar 1, 2 Samsung 6, 7 Sony 8, 9 Hitachi 4 Front Panel ...... a Disc Tray b Display window c Remote sensor d R (Open/Close) e T (Play/Pause) f 1/! (Power) g USB Port (DP932H only) Rear Panel a AC power cord b HDMI OUTPUT c AUDIO OUTPUT (Left/Right) d VIDEO OUTPUT e DIGITAL AUDIO OUTPUT (OPTICAL) f SCART (TO TV) Connecting 10 2 Connecting Connecting to your TV Connecting Video / Audio Cable Connect the VIDEO/AUDIO OUTPUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Video/Audio CableTVRear of the Unit Connecting SCART Cable Connect the TO TV jack on the unit and your TV using the SCART cable. For SCART connections, resolution must be set to 576i(480i) by pressing RESOLUTION button. COMPONENT VIDEVIDEO INLPBYSCARTCableRear of the UnitTV Connecting 11 2 Connecting Connecting HDMI Cable Connect the HDMI OUTPUT on the unit to the HDMI IN on compatible TV with HDMI cable. (Type A, High Speed HDMI™ Cable) COAXIALRear of the UnitTVHDMI Cable Additional Information for HDMI yyWhen you connect a HDMI or DVI compatible device, make sure of the following: --Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. --The connected device’s video input is set correctly for this unit. --The connected device is compatible with 720x576i(480i), 720x576p(480p), 1280x720p, 1920x1080i or 1920x1080p video input. --The 1080p, 720p and 576p(480p) resolutions are the progressive scan applied resolution. yyNot all HDCP-compatible DVI devices will work with this unit. --The picture will not be displayed properly with non-HDCP device. Resolution Setting You can change the resolution using RESOLUTION button. yyThe unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit. yyDepending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture re-appears. Connecting to an Amplifier Connecting Audio Cable Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Rear of the UnitReceiver / AmplifierAudio Cable Connecting OPTICAL (digital audio) Cable Connect one of the unit’s DIGITAL AUDIO OUTPUT (OPTICAL) jacks to the corresponding jack on your amplifier. OPTICALRear of the U...