Votos - 5, Puntuación media: 3.8 ( )

Fabricar: Yamaha Tamaño del archivo: 952.04 kb Nombre del archivo: DVDS530.pdf Idioma del manual:

Otros manuales para este modelo:

lector de DVD - DVD-S530 (757.61 kb)

Depending on the equipment you wish to connect, there are various ways you could connect this unit. Possible connections are shown in the following drawings. . Please refer to the manuals of other equipment as necessary to make the best connections. . Do not connect this unit via your VCR.The video quality could be distorted by the copy protection system. . Do not connect this unit’s audio out jack to the phono in jack of your audio system. Digital Connections This unit has COAXIAL and OPTICAL digital out jacks. Connect one or both of them to your AV receiver equipped with Dolby digital, DTS, or MPEG decoder using each specific cable (separate purchase). COAXIAL PCM DTS MPEG DIGITAL OPTICAL 1 2 AUDIO OUT R AV receiver Left main speaker Center speaker Right main speaker Subwoofer COAXIAL IN OPTICAL IN C O Left rear Right rear speaker speaker You will need to set this unit’s digital output to ALL (see ‘User Preference Settings’). Note: – If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Make sure to select the appropriate audio format at menu screen included on the disc. Pressing AUDIO once or more may change not only audio languages but also audio formats, and the selected format appears for several seconds on the status window. – MP3 Audio is not available on the Digital Output. Analog Connections Use audio/video cable supplied with this unit to connect AUDIO OUT L (left) and R (right) jacks of this unit to corresponding input jacks of your audio equipment such as Stereo amplifier.You can connect a subwoofer to this unit’s SUBWOOFER jack. COAXIAL PCM DTS MPEG DIGITAL 1 2 VIDEO SUBWOOFER AUDIO OUT VIDEO OUT S VIDEOOPTICAL Subwoofer (supplied) LR Stereo amprifier 1 CD/DVD R L R L Left Right speaker speaker English 5 Preparation Video Connections If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD,VCR etc.) by simply switching the input source selector of your receiver. The player has three types of video output jacks. Use one of them in accordance with the input jacks of the equipment to be connected. 1 2 VIDEO SUBWOOFER OUT VIDEO OUT COMPONENT VIDEO OUT S VIDEO PR PBR L Y COMPONENT VIDEO IN S VIDEO INPUT VIDEO Y PBCB PRCR V S AV receiver (supplied) VIDEO COMPONENT S VIDEO OUT VIDEO OUT OUT VIDEO COMPONENT S VIDEO IN VIDEO IN IN Component Video terminal Component video connection achieves high fidelity in reproducing colors (better performance than S-video connection), separating video signal into luminance (Y, terminal color-coded as green), and color difference (Pb, blue/Pr, red). Use commercially available coaxial cables. Receiver (and TV) with component input is required. Observe the color of each jack when connecting. If your receiver does not have component output jacks, connecting the player’s component output directly to your TV’s component input can reproduce better video image. S-Video terminal S (separate) video connection achieves a clearer picture than composite video connection by separating color and luminance when transmitting signals. Use commercially available S- video cable. Receiver (and TV) with S-video input is required. Composite Video terminal (1, 2) Use audio/video cable supplied with this unit when connecting the player to a TV. VIDEO 1, 2 jacks of VIDEO OUT output the same signal.You can connect one to your receiver’s input using supplied Audio/Video cable, and the other to another receiver or a TV. Preparation Inserting batteries into the Remote Control 1 Open the battery cover. 2 Insert batteries (AA size) with the correct polarity as indicated by the + and - symbols inside the battery compartment. 3 Close the cover. + -+ - CAUTION – Remove batteries if they are exhausted or not to be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed off properly and kept away from children. Using the Remote Control . Direct the remote control at the remote sensor of this unit. . Do not drop the remote control. . Do not leave the remote control near extremely hot or humid place. . Do not spill water or put anything wet on the remote control. NTSC/PAL Conversion This unit is equipped with an NTSC/PAL conversion feature that converts the video output of the disc to match your TV system. To activate the conversion refer to page 9. Turning on the power 1 Connect the AC power cord to the power outlet. 2 Turn on the TV and your AV receiver. 3 Select the appropriate input source at the AV receiver that was used to connect to this unit. Refer to the equipment owner’s manual for detail. 4 Turn this unit on. 5 Set the TV to the correct Video IN channel. (eg. EXT1, EXT2, AV1,AV2, AUDIO/VIDEO, etc. (Refer to your TV owner’s manual for detail) . The front display l...

Descargar ahora

Introduzca dos números de la imagen: