Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
RQT8706-Y.fm Page 24 Thursday, March 9, 2006 12:07 PM
Troubleshooting guide
Picture incorrect
Progressive video
Picture distorted.
≥ Ensure that the unit is not connected through a video cassette
There is ghosting
≥ This problem is caused by the editing method or material
recorder. (6)
when progressive
used on DVD-Video, but should be corrected if you use
≥ Have you selected an item in “Video Output Mode” (➜ page
output is on.
interlace output. Change “Video Output Mode” in Picture
18, Picture Menu) that is incompatible with the connected
Menu to “480i”. (18)
equipment? Depending on the current connection status,
When connecting with HDMI AV OUT terminal, connect with
perform corresponding steps.
the other terminals and change the settings in the following
―When connecting to a television that is incompatible with
order:
progressive output using the COMPONENT VIDEO
1. Select “Video Output”(“HDMI” tab) to “Off”. (21)
OUTPUT terminal:
2. Select “Video Output Mode”(Picture Menu) to “480i”. (18)
Press and hold [CANCEL] until the picture displays
Pictures not in
≥ If the unit is connected to the television through VIDEO OUT
correctly. The settings will return to “480i”.
progressive output.
or S VIDEO OUT, output will be interlace.
―When connecting to a television with an HDMI cable:
Closed captions
≥ When progressive output or HDMI output is on, closed
Press and hold [CANCEL] until the picture displays
not displayed.
captions will not be displayed.
correctly. The settings will return to “480p”.
Sound incorrect
―When connecting to an amplifier with an HDMI cable, and
to a television that is incompatible with progressive output
Sound distorted.
≥ Select “Off” in “Advanced Surround”. (12)
using the COMPONENT VIDEO OUTPUT terminal:
≥ Set “Attenuator” in Audio Menu to “On” if it causes distortion
1.Disconnect the HDMI (remove the cable/switch off the amplifier).
with AUDIO OUT connections. (19)
≥ Noise may occur when playing WMA files.
2.Press and hold [CANCEL] until the picture displays
≥[DVD-A] The disc may have restrictions on the method of
correctly. The settings will return to “480i”.
audio output. With some multi-channel discs, unless the
3.Set “Video Output” to “Off” in the “HDMI” tab. (21)
ng guide
number of connected speakers is the same as the disc’s
4.Connect the HDMI (connect the cable/switch on the amplifier).
≥ [DivX]
channel specification, audio will not be output properly. Refer
Change “Source Select” in Picture Menu. (18)
to the disc’s jacket for more information.
Picture size
≥ Change “TV Aspect” in “Video” tab. (20)
≥With HDMI AV OUT connections, audio may not be output
doesn’t fit the
≥ Use the television to change the aspect. If your television does not
from other terminals in the way that was set.
screen.
have that function, change “4:3 Aspect” in Display Menu. (19)
l
eshooti
≥
≥
Change the Zoom setting. (13)
Match the speaker settings with the connected equipment. (21)
Picture stops.
≥ Picture may stop if the DivX files are greater than 2GB.
Piercing noise
≥ If you have connected a digital amplifier which does not
The television may
≥PAL discs cannot be played. (You can play DVD-Audio;
comes from the
include decoder, be sure to select “PCM” in “Dolby Digital” or
display incorrectly
however, still pictures may be displayed enlarged.)
speakers.
“DTS Digital Surround” in “Audio” tab. (21)
r
oub
T
or colors appear
≥Connect to a progressive output compatible television to enjoy
Effects do not
≥ None of the audio effects work when the unit is outputting
faded.
progressive video.
work.
bitstream signals from the DIGITAL AUDIO OUT or HDMI AV
≥Picture may not be seen when more than 4 devices are connected
OUT terminal. (7, 8)
with HDMI cables. Reduce the number of connected devices.
≥ Some audio effects do not work or have less effect with
Menu not displayed
≥ Restore the zoom ratio to a1.00. (13)
some discs.
correctly.
≥ Set “Subtitle Position” in Display Menu to “0”. (19)
≥Night Sound Mode, H.Bass, Advanced Surround, Multi Re-
≥ Set “4:3 Aspect” in Display Menu to “Normal”. (19)
master and Sound Enhancement do not work if you have
Auto zoom
≥ Turn off TV’s zoom function.
changed the play speed.
function does not
≥ Use the other preset aspect ratios or manual adjustment. (13)
≥ With HDMI AV OUT connections, HDCD discs are played as normal CDs.
work well.
≥ Zoom function may not work well, especially in dark scenes
No sound
≥ There may be a pause in sound when you change the play speed.
and may not work depending on the type of disc.
≥Audio may not be heard when more than 4 devices are
Video is not
≥ Change the HDMI video output settings by using either of
connected with HDMI cables. Reduce the number of
output from HDMI
the procedures below.
connected devices.
AV OUT.
– Connect the television using VIDEO OUT or S VIDEO
≥[DivX] Audio may not be output due to how files were created. (5)
706
OUT terminal, then set “Video Output” to “On” in the
T8
“HDMI” tab. (21)
Q
R
– Press and hold [CANCEL] until the picture is displayed.
24
The settings will change to “On”.
...