Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Setup with Q Link
Download from TV using
(Registered trademark of Panasonic)
Download from TV
You can download the tuning positions for analogue channels from the TV set.
Time and date will be set automatically by the Auto Clock Setting function.
Pos
4
Download in progress, please wait.
Note that you must first perform a station search.
RETURN: to abort
If you have a Panasonic television, [Download from TV] will be displayed
automatically at the beginning of the station transfer.
! Switch your television on and select the AV channel.
RETURN
! Switch the unit on using the Standby/on switch.
The unit starts the station transfer.
The station transfer is complete when the Owner ID screen appears.
Owner ID
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press
the RETURN button. Your DVD Recorder is now ready to use.
PIN number * * * *
!
Name
To set the Owner ID now, use and press the Numeric buttons or
to enter a
four-digit PIN number. Press , to correct the digit.
House No.
! Be sure to remember the PIN number (write it down).
Postcode
RETURN
! Press the ENTER button twice to confirm.
!
RETURN : leave
Enter the [Name], [House No] and [Postcode] in the same way, using
.
! Press the ENTER button to confirm each entry.
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
Clock
(Auto clock set was not possible due to a weak signal)
Automatic Of
! Press
to set the correct time and date and press ENTER to finish this setting.
Time
Date
0 : 00 : 00
1 . 1 . 2005
Mind that a wrong date or time will influence the programmed recording of TV
No
0
9
programmes (don't forget to change summer time and winter time).
Clock cannot be set automatical y.
CHANGE
SELECT Please set the clock manual y.
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
ENTER: store RETURN: leave
ENTER RETURN
Setup automatically. In this case you can re-start Auto-Setup again. See page 97 of
Operating Instructions.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 97 of Operating Instructions.
Setup without Q Link
(Automatic tuning)
Auto-Setup
The automatic setup saves all available TV stations. If the station also broadcasts
Auto-Setup
date and time, then the clock is also set automatically.
Ch
4
! Switch on your television and select the AV channel.
Su
A c
uthoe- S
Seetn
u d
p e ir,
n bpitrte
o w
gr a
e r
s te
s, np.lease wait.
R
REETTU
UR
RN
N: : atb
o b
r
a e
b c
o hrten
! Use the Standby/on switch
.
to switch the unit on
Automatic setup starts and takes approx. 5 minutes.
RETURN
The station transfer is complete when the Owner ID screen appears.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press
Owner ID
the RETURN button. Your DVD Recorder is now ready to use.
!
PIN number
To set the Owner ID now, use and press the Numeric buttons or
to enter a
* * * *
Name
four-digit PIN number. Press , to correct the digit.
! Be sure to remember the PIN number (write it down).
House No.
! Press the ENTER button twice to confirm.
Postcode
RETURN
! Enter the [Name], [House No] and [Postcode] in the same way, using
.
!
RETURN : leave
Press the ENTER button to confirm each entry.
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
Clock
(Auto clock set was not possible due to a weak signal)
Automatic Of
! Press
to set the correct time and date and press ENTER to finish this setting.
Time
Date
0 : 00 : 00
1 . 1 . 2005
Mind that a wrong date or time will influence the programmed recording of TV
No
0
9
programmes (don't forget to change summer time and winter time).
Clock cannot be set automatical y.
CHANGE
SELECT Please set the clock manual y.
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
ENTER: store RETURN: leave
ENTER RETURN
Setup automatically. In this case you can re-start Auto-Setup again. See page 97 of
Operating Instructions.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 97 of Operating Instructions.
- 4 -
...