Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Setup with Q-Link
Download from TV using
(Registered trademark of Panasonic)
You can download the tuning positions for analogue channels from the TV set.
Auto-Setup
Time and date will be set automatically by the Auto Clock Setting function.
Ch
34
5
Note that you must first perform a station search if you use the TV for the first time.
Di S
gituacl he
A S
utoe-n
S dee
t r
u , pb iitnte
p w
ro a
g rrte
e n
s .
s, please wait.
RER
T E
U T
R U
N R
: tN
o : aabbobrrtechen
If you have a Panasonic television, [Download from TV] will be displayed
automatically at the beginning of the station transfer.
Download from TV
RETURN
! Switch your television on and select the AV channel.
Pos
4
! Switch the device on using the Standby/on switch.
Download in progress, please wait.
RETURN: to abort
The unit starts the station transfer. A station search for the digital channel starts first. The
number of channels found is displayed on the screen after the station search. Then the
analogue station positions are automatically transferred from the television. The station
transfer is complete when the Owner ID screen appears.
RETURN
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later,
Owner ID
press the RETURN button. Your DVD Recorder is now ready to use.
PIN number * * * *
! To set the Owner ID now, press the Numeric buttons or
to enter a four-digit
Name
PIN number. Press , to correct the digit.
House No.
! Be sure to remember the PIN number (write it down).
Postcode
! Press the ENTER button twice to confirm.
RETURN
! Enter the [Name], [House No] and [Postcode] in the same way.
RETURN : leave
! Press the ENTER button to confirm each entry.
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
Clock
If the clock setting menu appears
Automatic Of
(Auto clock set was not possible due to a weak signal)
Time
Date
0 : 00 : 00
1 . 1 . 2005
! Press
to set the correct time and date and press ENTER to finish this
No
setting.
0
9
Clock cannot be set automatical y.
CHANGE
SELECT Please set the clock manual y.
Mind that a wrong date or time will influence the programmed recording of TV programmes
ENTER: store RETURN: leave
ENTER RETURN
(don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setup
automatically. In this case you can re-start Auto-Setup again. See page 71 of Operating
Instructions.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 71 of Operating Instructions.
Setup without Q-Link Auto-Setup
(Automatic tuning)
The automatic setup saves all available TV stations. If the station also broadcasts
Auto-Setup
The date and time, then the clock is also set automatically.
Ch
34
5
! Switch on your television and select the AV channel.
!
Di S
gituacl he
A S
utoe-n
S dee
t r
u , pb iitnte
p w
ro a
g rrte
e n
s .
s, please wait.
With the Standby/on switch turn on the DVD Recorder.
RER
T E
U T
R U
N R
: tN
o : aabbobrrtechen
Automatic tuning for all available TV stations begins. The search is first performed for
the digital and then the analogue stations. The number of channels found is displayed on
Auto-Setup
RETURN
the screen after the station search.
Ch
34
5
Approximate duration is 5 minutes.
An S
al u
o cgh
u e
e S
A e
ut nod-e
S re,
t b
u it
p te
in w
pr aorte
grens.s, please wait.
! After Automatic tuning has finished, press RETURN.
RE R
T E
U T
R U
N: RtN
o :
a a
b b
or btrechen
The Owner ID screen will appear.
Owner ID
RETURN
You can complete the Owner ID now or skip this step and do it later. To do it later,
press the RETURN button. Your DVD Recorder is now ready to use.
Owner ID
! To set the Owner ID now, press the Numeric buttons or
to enter a four-digit
PIN number
PIN number. Press , to correct the digit.
* * * *
Name
! Be sure to remember the PIN number (write it down).
House No.
! Press the ENTER button twice to confirm.
! Enter the [Name], [House No] and [Postcode] in the same way.
Postcode
RETURN
! Press the ENTER button to confirm each entry.
RETURN : leave
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
Clock
If the clock setting menu appears
Automatic Of
(Auto clock set was not possible due to a weak signal)
Time
Date
! Press
to set the correct time and date and press ENTER to finish this
0 : 00 : 00
1 . 1 . 2005
setting.
No
0
9
Clock cannot be set automatical y.
Mind that a wrong date or time will influence the programmed recording of TV programmes
CHANGE
SELECT Please set the clock manual y.
ENTER: store RETURN: leave
(don't forget to change summer time and winter time).
ENTER RETURN
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setup
automatically. In this case you can re-start Auto-Setup again. See page 71 of Operating
Instructions. If you want to cancel Auto-Setup before it has finished, press the RETURN
button. You can restart Auto-Setup again. See page 71 of Operating Instructions.
- 4 -
...Otros modelos de este manual:
lector de DVD - DMRES20DEB (602.45 kb)