Iniciar sesión:
Votos - , Puntuación media: ( )

Manual de usuario Panasonic, modelo DMREX75

Fabricar: Panasonic
Tamaño del archivo: 6.29 mb
Nombre del archivo:

Idioma del manual:en

El documento se está cargando, por favor, espere
El documento se está cargando, por favor, espere

Resumen del manual


Additional connections
Connection with HDMI cable (not included)
(High Definition Multimedia Interface)
If you connect the DVD Recorder to an HDMI-compatible unit, just one cable
transfers a high quality digital audio and video signal without interference.
! Once an HDAVI Control-compatible unit has been connected to the HDMI terminal,
switch the units on and switch on the external unit, select the input channel for the
DVD Recorder. Repeat the procedure if there is any change to the HDMI terminal.
The audio signal cannot be transmitted via HDMI if an externally connected unit does
not support CPPM (Content Protection for Prerecorded Media), or when playing a
DVD audio with copy protection. In this case, use an audio cable.
63
If an connected TV only supports dual-channel audio, then an audio signal with 3 or
more channels is down-converted, with output through 2 audio channels.
It is not always possible to down-convert all discs.
49
Titles where down-converting is not possible can only be reproduced via HDMI
through an amplifier which corresponds to the HDMI Ver. 1.1 standard or higher and
is CPPM compatible.
For HDCP (High-Bandwidth Digital Content Protection) compatible units with DVI
connection (e.g. PC monitors): depending on the unit, it is possible that a DVI/HDMI
adapter does not reproduce the video signal perfectly. The audio signal is not
transmitted in this case.
Control via Q Link and HDMI (HDAVI Control)
If you connect this unit with an HDMI cable to
Automatic input changeover (Easy Playback)
a Panasonic television set with HDAVI control
If you start the playback function or select a menu (e.g. Direct Navigator,
function, then both units can be controlled.
Timer Recording), the TV automatically switches to the input channel for the
If you connect this unit with an fully wired 21
DVD Recorder.
pin scart cable you can use the Q Link
If you are recording on the DVD drive, the TV does not automatically change
functions to control the television and this unit.
to the input channel.
You can use both kinds of connection at the
same time.
Direct TV recording
Settings for control with HDMI and Q Link:
51
Press DIRECT TV REC to directly record the programme you are currently
watching. You do not need to enter anything else.
The following systems from other manufacturers
Power on link
have similar function to Q Link from Panasonic.
If you start the playback function or e.g. select the menu Direct Navigator
- Easy Link (Trademark of Philips)
or Timer Recording or by inserting a disc, the television set switches on
- SMARTLINK (Trademark of Sony)
and automatically selects the input channel for the DVD Recorder.
- DATA LOGIC (Trademark of Metz)
If you are recording on the DVD drive, the TV does not automatically
- Megalogic (Trademark of Grundig)
change to the input channel.
For details, refer to your television's operating
TV/DVD automatic switch-on
instructions or consult your dealer.
If the TV set and DVD Recorder are switched off (in standby), both units are
switched on automatically by pressing PLAY, DIRECT NAVIGATOR, GUIDE,
VIDEO Plus+ or PROG/CHECK.
Power off link
If the television set is switched off, this unit automatically switches off as well.
The unit also switches off while the menu FUNCTIONS, DISPLAY or status
messages are being displayed, and even when a Timer-controlled recording
has been programmed or during playback.
The unit does not switch off during a recording with the REC button, the
Copying function or while a disc is being finalized.
A TV takes a certain time to change over the
input channel for the DVD Recorder
Download from TV (analogue channels only)
automatically. It is therefore possible that the
Station transfer from television set. During [data transfer from TV], data for the
television set does not display the playback at
station list are automatically downloaded from the TV set. The stations are
the start of the title. Press SKIP

or
stored in the same presets of the DVD Recorder as on your TV set.
SLOW/SEARCH
to return to the start of
the playback.
This unit allows for Timer Recordings using the programming function of the
television (e.g. IDTV).
59


...

Otros modelos de este manual:
lector de DVD - DMREX85 (6.29 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría