Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
The playback picture will be distorted because DVD video discs are copy protected. r ------------1 If your TV has the component video input jacks, connect the i DVD video player to these jacks, instead of the VIDEO OUT or, S-VIDEO OUT jacks. 1 You can enjoy high quality picture playback. I I *Please consult your local audio/video dealer. i____________________I -E6- Connecting to an AV System with Dolby Pro Logic Decoder (Example 3) If your AV System has a Dolby Pro Logic decoder, please refer to the following example connection. DVD video player *Please consult your local audio/video dealer. Notes: • Please refer to the instruction manual with your AV System. • Please refer to “BASIC CONNECTIONS” too. • When you connect the DVD video player to your AV System, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made. -E7- Connecting to an AV Amplifier with Dolby Digital (AC-3) Decoder (Example 4) You can enjoy the surround sound that DVD video discs recorded in Dolby Digital. Notes: • Please refer to the instruction manual with your AV amplifier. • Please refer to “BASIC CONNECTIONS” too. • When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made. Manufactured under license form Dolby Laboratories. “Dolby”, “AC-3” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. -E8- Connecting to an Amplifier with a DTS Decoder (Example 5) Optical cable (not supplied) To digital audio input ■o Amplifier with a DTS decoder To DIGITAL OUT To S-video input or Video input Center / liiiiimi \ speaker Front right speaker Sub woofer L Before connecting, remove the protective cap from the jack. Replace the cover if there is no device connected to this jack. '£ Surround left speaker Surround right speaker ___i Notes: • Please refer to the instruction manual with your amplifier. • Please refer to ‘'BASIC CONNECTIONS” too. • When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made. The term DTS Digital Out is a trademark of Digital Theater Systems, Inc. Connecting to a Digital Amplifier (Example 6) You can enjoy 2 Channel Digital Stereo Sound. Amplifier with an optical digital input Notes: • Please refer to the instruction manual with your amplifier. • Please refer to “BASIC CONNECTIONS” too. • When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made. -E9- Listening with Headphones Connect a pair of stereo headphones with a 1/4" plug (not available from FISHER) to the PHONES jack for monitoring or for private listening. • Set the PHONE LEVEL control to the “MIN” position before connecting the headphones. Use the PHONE LEVEL control to adjust the volume of the headphones. Turn the control counterclockwise to decrease the volume, clockwise to increase it. Power supply Connect the power cord to a 120VAC 60Hz outlet. This unit is equipped with a polarized plug. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time, disconnect the AC plug from the AC outlet. NOTES: • Before plugging the power cord into an AC outlet, make sure that all the connections have been made. • The unit is not disconnected from the AC power unless the power cord is unplugged from the AC outlet. PHONES PHONE LEVEL CAUTION: Do not use the headphones for extended periods of time with the volume high. Doing so may damage your hearing. CAUTION: When connecting the DVD video player, follow the installation instructions described in the attached “IMPORTANT SAFETY INSTRUCTIONS”. FOR SAFE AND EFFICIENT OPERATION • Do not damage the power cord. • When not in use, disconnect the power cord from the outlet. Grasp the plug, not the cord, when disconnecting the unit. • If water should enter the unit, electrical shock or a malfunction may result. Use in an area where there is low humidity and little dust. • Do not disassemble or alter the unit in any way. • Do not use the unit in areas where extremes in temperature occur (below 40°F (5°C) or exceeding 95°F (35°C)), or where it may be exposed to direct sunlight. • Because of the DVD video player extremely low noise and wide dynamic range, there is a tendency to set the volume on the amplifier higher than necessary. Doing so may produce an excessively high output from the amplifier which can cause damage to your speakers. Please be careful in this regard. • Sudden changes in the surrounding temperature can cause dew to form on the optical pickup lens inside the unit. Under this conditio...
Otros modelos de este manual:lector de DVD - DVD-S1000 (1.69 mb)
lector de DVD - DVD-S1000 (1.69 mb)
lector de DVD - DVD-S1000 (1.69 mb)