Photos, FAQ's, Owner's Manuals ©2004 AEC150 Marcus Blvd., Hauppauge, N.Y. 1178» 1286972 MADE IN KOREA □□ DOLBY Г DIGITAL video' MMDVT DVD PLAYER Owner's Manual RECORD YOUR MODEL NUMBER (Now, while you can see it) The model and serial number of your new DVD player are located on the back of the DVD player cabinet. For your future convenience, we suggest that you record these numbers here: MODEL NO.. y Important Information A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A TO REDUCE T

Do not attempt to use 3” (8cm) CD-slngles In this unit either with or without an adapter, as damage to the DVD player and/ or disc damage can occur. Such damage Is not covered by warranty on this product. 4) UP CURSOR: Used to navigate through OSD (On Screen Display) menus. In play mode will also pause DVD play. 5) DOWN CURSOR: Used to navigate through the OSD (On Screen Display) menus. In playmode will also enable you to view DVD in slow motion. 6) LEFT CURSOR: Used to navigate through the O

When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on load a disc into the disc slot (lable side up). Adjust the viewing angle by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use. Overhead Dome Lights The lights integrated into the ADV200 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The

When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control (see page 16, Wireless Headphones, or page 17, Wireless FM Modulator). 23. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – The dome lights will not turn on in this position. • On – Turns on the dome lights. Note : Audiovox recommends the use of the Audiovox HP275 Hea

Press DISPLAY x 1 SINGLE ELAPSED appears along with the current track playing, the total number of tracks and the time playing on that track Press DISPLAY x 2 SINGLE REMAIN appears along with the current track playing,the total number of tracks and the amount of time left of that track. Press DISPLAY x 3 TOTAL ELAPSED appears along with the current track playing and the total time the CD has been playing. Press DISPLAY x 4 TOTAL REMAIN appears along with the current track playing,the total numbe

Higher rated scenes will not be played. An alternate scene will be played, if available. If there is no alternate scene with an approved rating, play will stop and the 4- digit code must be entered to resume play. 6. Press ENTER (4) to confirm, then press the down arrow ( ) to exit the menu. Operacion del Equipo de DVD (continuado) Control de Acceso ( DVD/VCD) (continuado) Desautorizando Discos Inserte un disco y deje que inicie su ejecucion. Presione el boton mientras en icono es visible. El ic

Built-in rubber pads keep it in place when it’s not in its stand. Power LED Status The LED on the front of the AVC-2210 lights up to indicate the status of operation. The following table indicates the status modes. LED Color Condition Description Off -Device is off Orange Steady Device is on, firmware is loading, also indicates standby mode Orange Blinking Error—for help, see Need Help with Your AVC-2210? on page 28 Green Steady Firmware succesfully loaded and ready for use Green Blinking A/V da

This section provides an overview of all three navigation tools. In the remainder of this Guide, the remote control is used as the primary navigation tool. Note: If you have a digital cable or satellite receiver, see Using a Set-top Box on page 23 for navigation information. Using the Control Panel The Control Panel buttons (shown below) can be navigated by mouse; click ? on the Control Panel to find more detailed information about each button. Volume Online Help Basic controls—Play, Stop, Forwa

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 7. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, playing particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 8. Lightning For added protection of this product during storms, or when it is left unattended and unused for long periods of time, unplug it from

Never spill liquid of any kind on the product. 10. Attachments. Do not use attachments not recommended by the product manufacturer as they may cause hazards. Important Safety Instructions PLEASE READ AND OBSERVE ALL WARNINGS AND INTRUCTIONS IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT, RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this