Votos - 4, Puntuación media: 4.8 ( )

Fabricar: Lennox Hearth Tamaño del archivo: 436.27 kb Nombre del archivo: Idioma del manual:

See Figure 4. Figure 4 -GLASS DOOR ADJUSTMENT Top Flange on Glass Door Bottom Vee-fl ange Glass Door Glass Door Latch Glass Door Firebox Floor Some models will have a modesty panel in the control compartment (in front of the valve). The appearance will vary from the example shown below. Modesty Panel 3. Install Firebox Bottom Cover Panel -For Models EDV-35/40/45, see Figure 5a. For Model EDVST see Figure 5b. ScrewStep 1 - Remove 2 fire- box bottom screws. Step 2 - Install the Firebox Bottom Cover Panel (#5 in Figure 1) using the existing screws that were removed. The top two holes on the panel align to corresponding holes on fi replace. Figure 5a -Install Firebox Cover For EDV-35/40/45 Models NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. For EDVST Model Only Step 1 - Remove the two #8 screws from the bracket screw cover on both sides. Step 3 - Install the Firebox Bottom Cover Panel (#5 in Figure 1) using the existing #10 screws. The bottom two holes on the cover panel align to cor- responding two holes on fi rebox bottom. Figure 5b -Install Firebox Cover Step 2 - Remove the two #10 screws from the firebox bottom on both sides (save screws). #10 Screw #8 ScrewBracket Screw Cover 4. For EDV, EDVST & EBVST models, reinstall modesty panel, ensuring all wires are securely connected. 5. Install Doorframe (see Figure 6) - Remove the arched doorframe from packaging. Position the top of the doorframe above the top of the glass doorframe (centered and approximately 1” above the top of the glass doorframe). Slide down so that the hooks catch on the back of the doorframe slide between the sides of the glass door and the corner posts engaging into existing slots on fi replace. Figure 6 - INSTALL DOORFRAME Left Corner Post Right Corner Post Doorframe 6. Place the doorframe bracket in the locked position as shown in Figure 7. Adjust Doorframe Bracket Doorframe Bracket Locate the doorframe bracket on the lower front of the doorframe and lock it behind the cabinet bottom fl ange as shown here. Figure 7 7. Remove the screen doors from packaging. Install them by aligning hinge pins on the doors with the hinge holes on the doorframe and slide down (see instructions in Figure 8). Ensure the hinge pins are fully seated onto the shoulders of the hinge holes. Align hinge pins on the doors with the hinge holes on the doorframe and slide down as shown. Hinge PinFirebox Firebox Figure 8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 8. Light the appliance following instrutions on lighting label in control compartment or see lighting instructions in Homeowner’s Care and Operation Manual provided with appliance. Note: Ensure that the latch(es) below the door are engaged with the door’s vee-fl ange and fully closed before operating the fi replace. 9. Install the lower compartment cover per instructions in Figure 9. Lower Compartment Cover Place the lower compartment cover hook behind the glass doorframe bottom fl ange. Knobs Figure 9 - INSTALL LOWER COMPARTMENT COVER 10....

Descargar ahora

Introduzca dos números de la imagen: