Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Always record the new emergency code below, then store these instructions in a secure location. 3. After the LED window clears, enter the new six-digit emergency code. The LED window will display the word "AGAIN". 4. When the LED window clears again, re-enter the new code. —if the second entry of the new emergency code matches the first entry, the LED window will display the word "DONE" and this procedure is complete. —if the second entry of the new emergency code does not match the first entry, the word "Error " will appear in the LED window and the previous emergency code will remain active. Re-start at Step 1 to change the current emergency code. Emergency Code: If you need help with your new safe, call our Tech Support at: (570) 546-9663. batteries The digital keypad and locking mechanism require four "AA" batteries to operate. Under normal conditions, new or fully charged batteries should last approximately one year. if the batteries have lost their charge and the digital keypad does not respond, use the safe key to open the door and replace the batteries. Note: The emergency code is stored in permanent memory so that, in the event the digital keypad loses power, this code will remain the same. Maintenance Wipe the surfaces of your safe with a clean, slightly damp cloth. if the door develops a squeak, open it and apply a drop or two to the hinge rod contact points. Troubleshooting Problem: The door will not close all the way. Solution: Make sure there is nothing obstructing the door. if the locking rods protrude to the left of the safe door, use the safe key to fully retract them back into the door. Problem: The digital keypad does not respond. Solution: The batteries may be low or fully discharged. Use the safe key to open the door and replace the batteries with new or fully charged ones. Problem: The personal code does not open the door. Solution: Use the safe key or emergency code to open the door, then follow the Personal Code instructions on Page 2 to create a new personal code. Problem: The personal and emergency codes have been forgotten or misplaced. Solution: Use the safe key to open the door, then follow the Personal Code instructions on Page 2 to create a new personal code. The emergency code cannot be reset or changed if it is forgotten or misplaced. -3 T21543/T21544/T21545 Electronic Keypad safe Buy Direct and Save with Grizzly® – Trusted, Proven and a Great Value! ~Since 1983~ Visit Our Website Today For Current Specials! ORDER 24 HOURS A DAY! 1-800-523-4777 ...
Otros modelos de este manual:Puertas y ventanas - T21543 (195.19 kb)
Puertas y ventanas - T21544 (195.19 kb)