Iniciar sesión:
Votos - 2, Puntuación media: 4 ( )

Manual de usuario Crimestopper Security Products, modelo COOL START RS-900

Fabricar: Crimestopper Security Products
Tamaño del archivo: 277.82 kb
Nombre del archivo: rs900_7a_ops.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


Most of the remote start features can be controlled through an existing factory or aftermarket remote keyless entry or alarm system. Pressing an auxiliary button on an Aftermarket system or pressing a button 3 times on a Factory keyless remote can activate a remote start using the 901. This is referred to in this manual as activating the “Green Start input wire”. *IMPORTANT INFORMATION: Primary and Optional Features -PRIMARY: These are features that must be connected in order for the system to operate properly i.e. Remote Start connections, Flashing lights, Brake Reset. For programming, the hood pin and program button -OPTIONAL: These are features are to be connected if desired or agreed upon by the customer installing dealer i.e. Door Locks, Trunk Horn-Honk, Anti-Grind, etc. These features may also require additional parts and/with your installer beforehand to be going to be installed with your particular TECHNICAL SUPPORT: (800) Monday - Friday 8:00am - 4: Web Site: E-mail: email@crimestopper. CRIMESTOPPER 1770 S. TAPO REV A - Text Box: This device complies with FCC Rules part 15. Operation is subject to the following two conditions: 1) This device may not cause interference, and (2) this device must accept any interference that may be received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modification could void the user's authority to operate the equipment. Text Box: TABLE OF CONTENTS Operation Cautions & Warnings…….……………..….…………………………………….………………………… Using the Remote Transmitter…………………………………………………………………………………...……. Remote Engine Control…………….…..…………………………………………………………………….………. Turbo Timer Mode……………………………….……………………………………...……………………………… Convenience and Safety Features……………………………….……………………………………...……..…… Transmitter Programming….…………….…………………………………………….…………………………....… 2 Vehicle Operation.…………………………………….………………...……………………..…………….……… Troubleshooting “Before You Call” Section……………..……………………………………………………..…. OPERATION CAUTIONS & WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed into all items, such as parking brake and all associated door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect DO NOT install the Remote Engine Starting System on MANUAL TRANSMISSION vehicles. If accidentally left in gear the vehicle could become a self-propelled IT IS ABSOLUTELY THE OWNER’S A) Understand the operation of this system and its safety features. B) Check for the installation facility. C) Check condition of the vehicle and all items operation of this system and its protect against accident and DO NOT remote start the Make sure that the garage adequate ventilation. injury or death from poisonous Carbon fumes. Text Box: 2 USING THE REMOTE TRANSMITTER The transmitter supplied with the RS-900 system has six buttons. The button configuration of the RS-900 is Factory-set and unchangeable. The RS901 model does not include remote transmitters, as it is designed for the expansion of a “parent” remote keyless or alarm system. See Page 11 for additional information on how to use your remote to operate a second vehicle equipped with an RS-900 system. NOTE: BUTTON #4 Remote Start There is a deliberate delay built into the system on button #4 to help prevent accidental remote starting from the remote being in your pocket or purse. During normal use, if you press button #4 too quickly, the system may not start the engine. REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - SUCCESSFUL 1) Press the remote start button for at least 1 second. (For RS901 models, activate Green Start input 2) Parking lights flash once; return solid, and 3) After a few seconds the Starter Motor engages, 4) Engine Starts and Runs. Parking Lights 5) Engine will remain running for programmed turned off with remote transmitter the Start button. (For RS901 model, Green Start input wire. AFTERIGN4STARTERTHENFLASH 1XSOLIDSOLIDSEC. Text Box: Text Box: 3 REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - UNSUCCESSFUL START In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then attempts to restart the engine a 2nd and 3rd time. For hard starting engines, the unit will allow a starter crank time of up to13 seconds maximum. This should provide ample cranking time for difficult starts, seconds to help prevent damage to the starter from over cranking. 1) If engine starts on 2nd or 3rd attempt, see steps 4 & 5 above of "Successful Start". 2) If Third attempt fails to start engine, the system will turn off and doors will remain NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY TURNING OFF A REMOTE STARTED ENGINE: 1) Engine is running in Remote Start (Parking lights ON). 2) Press and ...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría