Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Determine pivot location using dimensions on reverse side. Depth of mortise in the bottom of door will determine clearance. Be sure to properly locate and mark pivot center point of the base plate. Locate, drill, and tap 1/4-20 mounting holes for metal door. Locate and drill pilot holes for #14 wood screws for wood door. Mount door leaf in bottom of door with 1 /4-20 x 3/4” FHMS or #14 FHWS screws provided. Locate, drill, and tap mounting holes for jamb base plate. Pivot point of top pivot set must be plumb with bottom pivot point. Attach jamb base to side jamb with mounting screws provided. Tighten securely. If using a threshold, install threshold at this time. Install top pivot set and hang door. Refer to top pivot set instructions. If vertical height adjustment is necessary, use shims between door bottom and pivot leaf to increase clearance. To decrease clearance, mortise in door must be made deeper. A CAUTION Improper pivot set installation can lead to personal injury or property damage. Follow all instructions carefully. For questions contact Technical Support at 1-888-371-7331. I*"7 Ingersoll Rand 26631 Rev. 4 © 2006 Ingersoll-Rand Company Limited Security Technologies NOTE It is very important for installer to verify that center line of top pivot point lines up with center line of bottom pivot point before final installation. Door Leaf r Radius of heel edge of door must not exceed pivot point to jamb distance i=:< 1/4” 6 mm 7 1-3/4”-44 mm 5 C pivot and door C pivot and door -1-3/4” 44 mm 5/8” to 1-1/16”-16 mm 27 mm CL pivot and door 1/4”-6 mm 1-1/4”-32 mm Pivot Base 26631-00 26631 Rev. 4 26631-00...