Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Press: Menu *** Receive footer 1. On 2. Off 2. Select the Receive Footer option: To set the Receive Footer On, press To set the Receive Footer Off, press The menu selection screen redisplays. Press Exitor Stopto return to the Standby Mode. *** Please refer to your Menu Map. . . WorkCentre Pro 665/685/765/785 Getting Started Loading Documents The Document Tray holds up to 50 documents for transmitting or copying. Refer to the following size specifications for the range of documents that can reliably scan through the machine. If a document does not meet these specifications, make a copy on a copier using an accepted paper size, then insert the copied image in the Document Tray. Document Specifications The following table lists the sizes, types, and quantities of paper that can be loaded into the Document Feeder for copying or faxing. Single Sheet Multiple Sheets Max. Document Size 8.5 in. (W) x 16.5 in. (L) [216mm (W) x 420mm (L)] 8.5 in. (W) x 16.5 in. (L) [216mm (W) x 420mm (L)] Min. Document Size 5.8 in. (W) x 3.9 in. (L) [148mm (W) x 100mm (L)] Same as single sheet. Effective Scanning Width 8.5 inches [216 mm] Same as single sheet. Max. capacity of the Document Feeder N/A 50 sheets (Letter/A4 size) 20 sheets (Legal size) Weight of Paper Stock 45 g/m2 to 120 g/m2 (14 lbs to 32 lbs) 50 g/m2 to 100 g/m2 (14 lbs to 28 lbs) Avoid the following types of documents which can cause jams: • Torn, wrinkled, curled, or folded sheets • Sheets with punched holes • Transparencies • Sheets with paper notes attached • Coated or shiny sheets • Carbon or carbon backed sheets WorkCentre Pro 665/685/765/785 Getting Started To load documents: Load the document face down in the document tray. Adjust the document guide to fit the width of the document. Angle the stack to optimize feeding performance. To cancel a document in the ADF, press Stop. Document WorkCentre Pro 665/685/765/785 Getting Started Selecting the Scan Resolution The Resolution key selects the scan mode for copying, transmitting, or storing a document in memory. The scan resolution can be set to one of five settings based on the type of image you are scanning. To select the Scan Resolution: Press the Resolution key until the required resolution mode is indicated by the Resolution LED. Note: When the resolution LED is not illuminated, the Resolution setting isStandard. The default resolution setting is standard only on the base machine. The machine returns to the default setting after each transaction. Refer to the System Administrator’s Guide for details about changing the default setting for resolution. The following table describes the available resolution selections: Resolution selection Description Standard Use for sending normal text and graphics. Selected when the Resolution LED is off. Fine Use for documents with small characters (newspaper print, etc.). Superfine Use for documents containing very detailed print. Photo Fine Use for photos or documents with colors or shading with low contrast images. Photo Superfine Use for very detailed photos or documents with colors or shading with high contrast images. If you choose a resolution and the receiving machine does not have an equivalent, the WorkCentre chooses the next highest resolution compatible with the remote machine. If you do not know the remote machines resolution capability, it is recommended that you use the Direct Send mode when Superfine Photo is selected. In Direct Send mode, the WorkCentre determines the receive resolution prior to scanning the document. The document is then scanned at the compatible receiver resolution resulting in better print quality. WorkCentre Pro 665/685/765/785 GettingStarted Selecting the Scan Contrast To select the Scan Contrast: Press the Contrastkey until the required contrast mode is indicated by a Contrast LED Note: Whena ContrastLED isnot il lluminated,theContrast setting isNormal. The Contrast setting adjusts the print darkness of the copy or transmitted document. The default contrast setting is normal on base machine. The machine returns to the default setting after each transmission. Refer to the System Administrator’s Guide for details about changing the default setting for contrast. The following table describes the available contrast selections Contrast selection Description Normal For documents printed with ordinary image density. Selected when the Contrast LED is off. Lighten For documents with dark print that need to be adjusted to print lighter. Darken For documents with light or faint print that need to be adjusted to print darker. WorkCentre Pro 665/685/765/785 Getting Started Quick Start To Receive The default answer mode is Auto answer. When the remote party calls to send you a document, your WorkCentre automatically receives and prints the document. To Send 1. Load a document face down in the Document Tray. 2. Using the Numeric Keypad, enter the telephone number of the remote fax. 3. Press Start. To Copy 1. Load a document face down in the Document ...
Otros modelos de este manual:Fax - 665 (731.8 kb)
Fax - 685 (731.8 kb)
Fax - 785 (731.8 kb)