Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
This eliminates someone removing documents from the feeder and forgetting to replace them. Setting Press the MENU button 5 times. PROGRAM[1 .DATE 2.TEL 3.SYSTEM 4.REPORT] Press then press “28". 28.MEMORY POLLING = OFF [1.0FF 2.ON] Press “2”, then press the SET button. 28.MEMORY POLLING =ON [1.0FF 2.ON] PROGRAM[1.DATE 2.TEL 3.SYSTEM 4.REPORT] Press the MENU button to end the operation. Operation Do the same operation on page 3-3 (Being polled). When the START/COPY button is pressed, the documents are scanned into memory. Note: •The stored documents have been kept in memory even after transmission. This is very useful when you need to transmit the same documents to several stations. •To erase the stored documents, press the STOP button, then press “1”. •If a power failure occurs, the stored documents are lost. A report will be printed stating that the contents have been cleared due to “power down”. See page 4-5. 1 2 3 4 : 5 times i MENU 1-------> c: j 3-18 Advanced Instructions Advanced Instructions Using the PRIORITY keys The unit has 5 PRIORITY keys. Each key is used to program communication parameters and starting time as well as a phone number in a direct call station key. The programmed operation works automatically by just pressing the appropriate PRIORITY key. This is very useful when you perform the same functions frequently. You are able to set these keys once eliminating lengthy programming each time you perform a function. The types of operations that can be set in a PRIORITY key include (1) delayed transmission, (2) (delayed) multi transmission, (3) (delayed) single station polling, (4) (delayed) multi station polling, (5) (delayed) turnaround polling. Note: •The PRIORITY keys can also be used as direct call station keys #1 to #5, but they cannot be used for two purposes. For example, if the direct call station key #1 has already been used for a number, it cannot be used as the PRIORITY key #1. •You can print out the PRIORITY KEY LIST for confirmation after programming. (See page 4-6.) Direct call station keys PRIORITY keys 3-19 Initial procedure for programming 1 2 3 4 5 Example: The PRIORITY key #1 Press the MENU button 5 times. PROGRAM[1 .DATE 2.TEL 3.SYSTEM 4.REPORT] Press “2”. SELECT AUTO OR DIRECT CALL KEY Press the desired PRIORITY key (#1 through #5) in which you wish to program. (Example: The PRIORITY key 1 is pressed.) PRIO.1 MODE = DIAL [1 .DIAL 2.PROG.] Press “2” for programming, then press the SET button. MODE=XMT [1.XMT 2.POLL 3.XMT&POLL] If you use this key as a direct call station key, press “1” instead of “2”, then enter the phone number and station name. Refer to pages 1 -25 and 1-26. Press “1 ”, “2” or “3” to select the desired mode. Press “1” for transmission (XMT) mode. (Go to page 3-21 for delayed transmission.) (Go to page 3-22 for multi station transmission.) Press “2” for polling (POLL) mode. (Go to page 3-24 for single station polling.) (Go to page 3-25 for multi station polling.) Press “3” for turnaround polling (XMT&POLL) mode. (Go to page 3-27.) 3-20 Advanced Instructions Advanced Instructions Programming delayed single station transmission Follow these steps after performing the initial procedure on page 3-20. Press the SET button. ENTER PHONE NUMBER [01] Enter the phone number using the direct call station key, the speed dial station or a full number. (Example: Direct call station 7 is dialed.) ENTER PHONE NUMBER =