Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
ADF Document Output Support Flap The documents are Face Up in the ADF 5 Press Start. The DCP starts scanning the first page. INTRODUCTION 1 -11 Using the scanner glass Using the scanner glass 1 Lift the document cover. Originals are Face Down on the Scanner Glass 2 Using the document guidelines on the left, center the orignal face down on the scanner glass and close the document cover. 3 Using the numeric keys, enter the number of copies you want (up to 99). 4 Press Start. The DCP will start scanning the original. If the original is a book or is thick, do not slam the cover or press on it or you may damage the DCP. 1 - 12 INTRODUCTION 2 About paper Type and size of paper The DCP loads paper from the installed paper tray, manual feed tray, multi-purpose tray or optional lower tray. Tray Type Model name Paper tray (Tray #1) DCP-8040, DCP-8045D Manual feed tray DCP-8040 Multi-purpose tray (MP tray) DCP-8045D Optional lower tray (Tray #2) Option for DCP-8040, DCP-8045D Recommended paper Plain Paper: Xerox 4200DP 20 lb Hammermill Laser Paper 24 lb Transparency: 3M CG 3300 Labels: Avery laser label #5160 ¦ Before you buy a large amount of paper, please test some to make sure that the paper is suitable. ¦ Use paper that is made for plain-paper copying. ¦ Use paper that is 20 to 24 lb (75 to 90 g/m2). ¦ Use neutral paper. Do not use acidic or alkaline paper. ¦ Use long-grain paper. ¦ Use paper with a moisture content of approximately 5%. PAPER 2 - 1 n Do not use ink jet paper. It may cause a paper jam and damage your DCP. The output quality depends on the paper type and paper brand. Visit us at and check the latest recommendations for paper that can be used with the DCP-8040 and DCP-8045D. Choosing acceptable paper We recommend that you test paper (especially special sizes and types of paper) on the DCP before purchasing large quantities. ¦ Avoid feeding label sheets that are partly used or your DCP will be damaged. ¦ Avoid using coated paper, such as vinyl coated paper. ¦ Avoid using preprinted or highly textured paper, or paper with an embossed letterhead. For optimum printing, use a recommended type of paper, especially for plain paper and transparencies. For more information on paper specifications, call your nearest authorized sales representative or the place where you purchased your DCP. ¦ Use label or transparencies that are designed for use in laser printers. ¦ For the best print quality, we recommend using long-grained paper. ¦ If you are using special paper and the paper has problems feeding from the paper tray, try again using the manual feed tray or multi-purpose tray. ¦ You can use recycled paper in this DCP. 2 - 2 PAPER Paper capacity of the paper trays Paper capacity of the paper trays Number of sheets Multi-purpose tray (MP tray) (DCP-8045D) Width: 2.75 to 8.66 in. (69.8 to 220 mm) Height: 4.57 to 16.0 in. (116 to 406.4 mm) 50 sheets (20 lb or 80 g/m2) Manual feed tray (DCP-8040) Width: 2.75 to 8.66 in. (69.8 to 220 mm) Height: 4.57 to 16.0 in. (116 to 406.4 mm) Single sheet Paper tray (Tray #1) A4, Letter, Legal, B5 (ISO), B5 (JIS), Executive, A5, A6, B6 (ISO) 250 sheets (20 lb or 80 g/m2) Optional lower tray (Tray #2) A4, Letter, Legal, B5 (ISO), B5 (JIS), Executive, A5, B6 (ISO) 250 sheets (20 lb or 80 g/m2) Duplex printing (DCP-8045D) A4, Letter, Legal — PAPER 2 - 3 Paper specifications for each paper tray Paper specifications for each paper tray DCP-8040 DCP-8045D Paper types Multipurpose tray N/A Plain paper, Bond paper, Recycled paper, Envelope*1, Labels*2, and Transparency*2 Manual feed tray Plain paper, Bond paper, Recycled paper, Envelope, Labels, and Transparency N/A Paper tray Plain paper, Recycled paper, and Transparency*2 Optional Lower tray Plain paper, Recycled paper, and Transparency*2 Paper weights Multipurpose tray N/A 16 to 43 lb (60 to 161 g/m2) Manual feed tray 16 to 43 lb (60 to 161 g/m2)N/A Paper tray 16 to 28 lb (60 to 105 g/m2) Optional Lower tray 16 to 28 lb (60 to 105 g/m2) Paper sizes Multipurpose tray N/A Width: 2.75 to 8.66 in. (69.8 to 220 mm) Height: 4.57 to 16.0 in. (116 to 406.4 mm) Manual feed tray Width: 2.75 to 8.66 in. (69.8 to 220 mm) Height: 4.57 to 16.0 in. (116 to 406.4 mm) N/A Paper tray A4, Letter, Legal, B5 (ISO), B5 (JIS), Executive, A5, A6, B6 (ISO) Optional Lower Tray A4, Letter, Legal, B5 (ISO), B5 (JIS), Executive, A5, B6 (ISO) *1 Up to 3 envelopes *2 Up to 10 sheets When printing transparencies, remove each one from the face-down output tray after it exists the DCP. 2 - 4 PAPER How to load paper How to load paper 1 Pull the paper tray completely out of the DCP. 2 While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that the guides are firmly in the slots. For Legal size paper, press the universal guide release button and pull out the back of the paper tray. Universal Guide Release Button PAPER 2 - 5 3 Fan the stack of paper well to avoid paper jams and misfeeds. 4 Put paper in ...
Otros modelos de este manual:Fax - DCP-8040 (2.22 mb)