Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Cámaras - DMCFX580 (24.03 mb)
Cámaras - DMCFX580 (21.59 mb)
Cámaras - DMCFX580 (23.84 mb)
Resumen del manual
1 Open the card/battery door. 2 Insert the DC coupler, being careful of the direction. 3 Close the card/battery door. • Ensure that the card/battery door is closed. 4 Open the DC coupler cover A. 5 Plug the AC adaptor into an electrical outlet. 6 Connect the AC adaptor B to the [DC IN] socket C of the DC coupler. D Align the marks, and insert. • Ensure that only the AC adaptor and DC coupler for this camera are used. Using any other equipment may cause damage. Note • Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional). • Some tripods cannot be attached when the DC coupler is connected. • This unit cannot be stood upright when the AC adaptor is connected. When placing it down and operating, we recommend placing it on a soft cloth. • Make sure to unplug the AC adaptor when you open the card/battery door. • If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera. Also, please keep the DC coupler cover closed. • Also read the operating instructions for the AC adaptor and DC coupler. • For information about optional accessories, refer to the “Digital Camera Accessory System”. (P134) Preparation About the Built-in Memory/the Card The following operations can be performed using this unit. • When a card has not been inserted: Pictures can be recorded in the built-in memory and played back. • When a card has been inserted: Pictures can be recorded on the card and played back. • When using the built-in memory k>. (access indication.) • When using the card † (access indication.) . The access indication lights red when pictures are being recorded on the built-in memory (or the card). Built-in Memory • Memory size: Approx. 40 MB • Recordable motion pictures: QVGA (320k240 pixels) only • The built-in memory can be used as a temporary storage device when the card being used becomes full. • You can copy the recorded pictures to a card. (P103) • The access time for the built-in memory may be longer than the access time for a card. Card The following types of cards can be used with this unit. (These cards are indicated as card in the text.) Type of card Characteristics SD Memory Card (8 MB to 2 GB) (Formatted using the FAT12 or FAT16 format in compliance with the SD standard) • Fast recording and writing speed. • Write-Protect switch A provided. (When this switch is set to the [LOCK] position, no further data writing, deletion orformatting is possible. The ability to write, delete and format data is restored when the switch is returned to its original position.) 2 A SDHC Memory Card (4 GB to32 GB). (Formatted using the FAT32 format in compliance with the SD standard) MultiMediaCard • Still pictures only. . The SDHC Memory Card is a memory card standard decided by the SD Association in 2006 for high capacity memory cards more than 2 GB. . You can use an SDHC Memory Card in equipment that is compatible with SDHC Memory Cards however you cannot use an SDHC Memory Card in equipment that is only compatible with SD Memory Cards. (Always read the operating instructions for the equipment being used.) • You can only use cards with SDHC logo (indicating compliance with the SD standard) if using cards with 4 GB or more capacity. • Please confirm the latest information on the following website. (This Site is English only.) 18 VQT1Y62 Preparation Note • Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor (DMW-AC5PP; optional) when the access indication is lit [when pictures are being written, read or deleted, or the built-in memory or the card is being formatted (P27)]. Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again. • The data on the built-in memory or the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc. • Do not format the card on your PC or other equipment. Format it on the camera only to ensureproper operation. (P27) • Keep the Memory Card out of reach of children to prevent swallowing. Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. Turn the camera on. • The [PLEASE SET THE CLOCK] message appears. (This message does not appear in [PLAYBACK] Mode.) A [MENU/SET] button B Cursor buttons ONOFF /SET MENU Press [MENU/SET]. : Press 2/1 to select the items (year, month, : day, hour, minute, display sequence or time display format), and press 3/4 to set. A: Time at the home area B: Time at the travel destination (P72) ‚: Cancel without setting the clock. • Select either [24HRS] or [AM/PM] for the time display format. • AM/PM is displayed when [AM/PM] is selected. • When [AM/PM] is selected as the time display format, midnight is displayed as AM 12:00 and n...