Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
25 mm Hold this unit gently with both hands, keep your arms still at your side and stand with your feet slightly apart. 1 Press the shutter button halfway to focus. • The focus indication 1 (green) lights when the subject is focused. • The AF area 2 is displayed around the subject’s face by the Face Detection function. In other cases, it is displayed at the point on 2the subject which is in focus. • The focus range is 3 cm (0.10 feet) (Wide)/ 1 m (3.28 feet) (Tele) to ¶. Press the shutter button fully (push it in further), and take the picture. (ENG) VQT2L93 19 Scene Detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red. ¦ > • Only when [ ] is selected [i-PORTRAIT] [i-SCENERY] [i-MACRO] [i-NIGHT PORTRAIT] [i-NIGHT SCENERY] [i-SUNSET] [i-BABY] •[¦] is set if none of the scenes are applicable, and the standard settings are set. • When [ ], [ ] or [ ] is selected, the camera automatically detects a person’sface, and it will adjust the focus and exposure. (Face Detection) AF Tracking Function It is possible to set the focus to the specified subject. Focus will keep following the subject automatically even if it moves. 1 Press 3. •[ ] is displayed in the upper left of the screen. • AF Tracking frame is displayed in the center ofthe screen. • Press 3 again to cancel. 2 Bring the subject to the AF tracking frame, and press 4 to lock the subject. • AF tracking frame will turn yellow. • An optimum scene for the specified subject will be chosen. • Press 3 to cancel. 20 VQT2L93 (ENG) [REC] Mode: n·. Recording Motion Pictures [REC] Mode: n·. Recording Motion Pictures This can record high definition motion pictures compatible with the AVCHD format or motion pictures recorded in Motion JPEG. Audio will be recorded in monaural. Slide the [REC]/[PLAYBACK] selector switch to [!]. Switching the mode by rotating themode dial. A Mode dial B Motion picture button Start recording by pressing the A motion picture button. A Available recording time B Elapsed recording time • After pressing the shutter button fully, release it straight away. • The recording state indicator (red) C will flash while recording motion pictures. CB Stop the recording by pressing the motion picture button again. • If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically. Note • Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the maximum recordable time for 2 GB is displayed on the screen. • Maximum time to record motion pictures continuously with [AVCHD Lite] is13 hours 3 minutes 20 seconds. Screen will only display up to 13 hours 3 minutes 20 seconds. However, the recording may stop before that depending on the remaining battery level. (ENG) VQT2L93 21 [PLAYBACK] Mode: . Playing Back Pictures ([NORMAL PLAY]) [PLAYBACK] Mode: . Playing Back Pictures ([NORMAL PLAY]) Slide the [REC]/[PLAYBACK] selector switch A to [(]. Press 2/1 to select the picture. • After selecting the motion picture, press 3 to start playback. [PLAYBACK] Mode: . Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures on the built-in memory or the card, that are being played back will be deleted. Select the picture to be deleted, and then press [‚]. A [‚] button Press 2 to select [YES] and then press [MENU/SET]. 22 VQT2L93 (ENG) Reading the Operating Instructions (PDF format) Reading the Operating Instructions (PDF format) • You have practised the basic operations introduced in these operating instructions and want to progress to advanced operations. • You want to check the Troubleshooting. In these kinds of situations refer to Operating Instructions (PDF format) recorded on the CD-ROM containing the Operating Instructions (supplied). .For Windows Turn the PC on and insert the CD-ROM containing theOperating Instructions (supplied). Click the [Operating Instructions]. Select the desired language and then click [Operating Instructions] to install. A To return to the install menu. Double click the “Operating Instructions” shortcut icon on the desktop. (ENG) VQT2L93 23 .When the Operating Instructions (PDF format) will not open You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to browse or print the Operating Instructions (PDF format). Insert the CD-ROM containing the Operating Instructions (supplied), click B and then follow the messages on the screen to install. (Compatible OS: Windows 2000 SP4/Windows XP SP2 or SP3/Windows Vista SP1 or SP2/Windows 7) • You can download and install a version of Adobe Reader that you can use with your OS from the following Web Site. .To uninstall the Operating Instructions (PDF format) Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder. • When the contents in the Program Files folder cannot be displayed, click the [Show the contents of this folder] to di...