Votos - 1, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
*2 Operating performance cannot be ensured if voltage drops or other problems are caused by the nature of the battery. [ WARNING Battery may explode or leak if mistreated. Do not recharge, disassemble or dispose of in fire. Check the valid date (month-year) displayed on the batteries. [ To check the remaining battery time Press POWER to turn on and check the time on the LCD screen. Battery remaining indicator Battery remaining guidelines Sufficient power remaining Battery half full Battery low, recording/ playback will stop soon. Replace the batteries with new ones, or fully charged Nickel- Metal Hydride batteries. (The warning indicator flashes.) • The displayed time remaining may not be correct under certain circumstances. • When using alkaline batteries/Oxy Nickel Primary Battery, the battery remaining indicator may not display the correct information. • When the AC Adaptor (not supplied) is used, the battery remaining indicator is not displayed. [ To remove the batteries/“Memory Stick Duo” Open the battery/“Memory Stick Duo” cover. “Memory Stick Duo” Batteries Access lamp Access lamp • Make sure that the access lamp is • Be sure not to drop the batteries. not lit, then push the “Memory Stick • Do not open the battery cover or turn Duo” in once. off the camera while the access lamp is lit, otherwise the data may be destroyed. 2 Turning the camera on/setting the clock POWER button Control button Mode dial 1 2 3 1Select with the mode dial, then press the POWER button. 2Set the clock with the control button. 1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK] with B, then press z. [ To change the date and time Select [Clock Set] in the (Setup) screen (page 19). [ When you turn on the power • Unless you set the clock, the Clock Set screen appears each time the camera is turned on. • If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery (Auto power-off function). Shooting images easily Mode dial DISP button Tripod receptacle (bottom) (Image Size) button Shutter button Zoom (W/T) button Control button 1Select a mode with the mode dial. Still image (auto adjustment mode): Select . Movie: Select . 2Hold the camera steady, keeping your arm at your side. Position the subject in the center of the focus frame. 3Shoot with the shutter button. Still image: AE/AF lock indicator 1 Press and hold the shutter button halfway down to focus. The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and remains lit. 2 Press the shutter button fully down. The shutter sounds. Movie: Press the shutter button fully down. To stop recording, press the shutter button fully down again. [ Selecting the still image mode Set the mode dial to the desired function. Auto Adjustment mode Allows easy shooting with the settings adjusted automatically. Program auto shooting mode Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu. High Sensitivity Shoot images without a flash even in low lighting. Soft Snap Shoot a person’s skin with a warmer look. Twilight Portrait Shoot sharp images of people in a dark place without losing the nighttime atmosphere. Twilight Shoot night scenes without losing the nighttime atmosphere. Landscape Shoot with the focus on a distant subject. Beach Shoot seaside or lakeside scenes with the blueness of the water captured more vividly. Snow Shoot snow scenes in white more clearly. [ Using the zoom Press the zoom button. • When the zoom scale exceeds 3., the camera uses the Digital Zoom function. • You cannot change the zoom scale while shooting a movie. [ Flash (Selecting a flash mode for still images) Press v ( ) on the control button repeatedly until the desired mode is selected. (No indicator): Flash Auto Strobes when there is insufficient light (default setting). : Flash forced on : Slow synchro (Flash forced on) The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light. : Flash forced off [ Macro (Shooting close-up) Press B ( ) on the control button. To cancel, press B again. (No indicator): Macro Off : Macro On (W side: Approx. 5 cm or farther (2 inches or farther), T side: Approx. 35 cm or farther (13 7/8 inches or farther)) [ Using the self-timer Press V ( ) on the control button repeatedly until the desired mode is selected. (No indicator): Not using the self-timer : Setting the 10-second delay self-timer : Setting the 2-second delay self-timer Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates. [ EV (Adjusting the exposure) Press b ( ) on the control button, then press v/V to adjust the exposure. Toward +: Brightens an image. Toward –: Darkens an image. To turn off t...
Otros modelos de este manual:Cámaras - DSC-S700 (1.06 mb)