Votos - 5, Puntuación media: 4.2
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
If the jammed paper cannot be removed, contact the Sony service facilities. Printing stops midway. • If the ERROR indicator flashes rapidly, the paper is jammed. See “If paper jams” (tpage 25) and remove jammed paper from the printer. If jammed paper cannot be removed, contact the Sony service facilities. Buttons on the remote control do not work, and no operations allowed. • Check if the camera is connected to the camera adaptor correctly. • Check if the AC adaptor is connected properly. • The battery in the remote control is dead. Replace the battery with a new one. Cannot attach the camera on the camera adaptor. • Check if the model select switch is set to “A”. (tpage 9) If paper jams If the print paper jams, the ERROR indicator lights or flashes rapidly and printing stops. When the ERROR indicator lights, remove the print paper and resume printing. When the ERROR indicator flashes rapidly, disconnect the AC power cord (mains lead) from the wall outlet (wall socket), then insert it again. When the printer’s initial loading process ends, remove the paper tray from the printer. Check if there is jammed paper in the paper outlet or feeding slot of the printer and remove the jammed paper, if any. ERROR indicator PNote If you cannot remove the jammed paper, contact your Sony dealer or service facilities. Cleaning the inside of the printer If white lines or periodical dots are printed on the pictures, use the cleaning cartridge supplied and the cleaning sheet of the supplied printing pack to clean inside the printer. 1 Open the ink ribbon compartment cover and if there is an ink ribbon, remove it (page 12). 2 Insert the supplied cleaning cartridge into the printer and close the ink ribbon compartment cover. 3 Remove the paper tray from the printer. If there is print paper in the tray, remove the print paper from the tray. 4 Place the cleaning sheet into the paper tray. Insert the cleaning sheet with the no-imprint side facing up. surface without imprints When cleaning ends Set the ink ribbon and print paper into the printer. PNotes • Carry out cleaning only when there are white lines or dots on the print. • When you can obtain proper printing performances, cleaning will not improve the printed picture quality. • Do not place the cleaning sheet on the print paper and carry out cleaning, which may cause paper jam or other troubles. • If a cleaning does not improve printed picture quality, please carry out cleaning a couple of times. 5 Set the paper tray into the printer. The printer starts cleaning automatically. The 1 (on/standby) indicator flashes slowly in green. After the cleaning is finished, the cleaning sheet is automatically ejected from the paper eject slot. 6 Remove the cleaning cartridge and cleaning sheet from the printer. • Keep the cleaning cartridge and cleaning sheet together for future cleaning. Precautions On safety • Be careful not to set or drop any heavy objects on the power cord, or to damage the power cord in any way. Never operate this printer with a damaged power cord. • Should any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further. • Never disassemble the printer. • To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. • When the printer is not going to be used for an extended period of time, disconnect the power cord from the wall outlet. • Do not handle the printer roughly. • To reduce the risk of electrical shock, always unplug the printer from the electrical outlet before cleaning and servicing the printer. On installation • Be sure to install the printer horizontally or vertically in the instructed way. Otherwise, this may cause a malfunction. • Avoid placing the printer in a location subject to: – vibration – high humidity – excessive dust – direct sunlight – extremely high or low temperatures • Do not use electrical equipment near the printer. The printer will not work properly in electromagnetic fields. • Do not place heavy objects on the printer. • Leave enough room around the printer so that the ventilation holes are not blocked. Blocking these holes may cause internal heat build-up. On the AC adaptor • Be sure to use the AC adaptor supplied with the printer. Do not use other AC adaptors, as this may cause a malfunction. • Do not use the supplied AC adaptor to other devices. • Do not use an electrical transformer (travel converter), as this may cause overheat or a malfunction. • In case the cord of the AC adaptor is damaged, never use it any longer, as this may cause danger. On moisture condensation If the printer is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the printer will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC power cord of the printer and do not use...