Votos - , Puntuación media:
(
)
)
Fabricar: Canon
Tamaño del archivo: 3.04 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
121 Changing Shooting Function Settings . Turning Off the Red-Eye Reduction Function The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function. . Choose [Flash Settings], then press the m button. . Press the op buttons to choose [Red-Eye Lamp], then press the qr buttons to choose [Off]. . Changing the Image Display Time Right After Shooting You can change the length of time the images display after shooting. . Choose [Review], then press the qr buttons to choose an option. 2 – 10 sec. Displays images for the set time. Hold The image displays until you press the shutter button halfway. Off No image displays. After Shooting You can change the way the image displays after shooting. . Changing the Way the Image Displays Right . Choose [Review Info], then press the qr buttons to choose an option. Off Displays the image only. Detailed Displays detailed information (p. 44). Focus Check The area inside the AF frame is magnified, allowing you to check the focus. The procedure is the same as in “Checking the Focus” (p. 95). 122 Changing Shooting Function Settings . Displaying the Overlay You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints. . Choose [Disp. Overlay], then press the qr buttons to choose an option. Grid Lines A grid overlays the display. 3:2 Guide Gray bars will appear on the top and bottom of the display. This area will not print when printing on paper with a 3:2 aspect ratio. Both Both grid lines, and the 3:2 guide will display. • In mode, you cannot set [3:2 Guide] or [Both]. • Grid Lines will not be recorded on the image. • The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas. . Changing the IS-Mode Settings . Choose [IS Mode], then press the qr buttons to choose an option. Continuous Shoot Only Panning Image stabilization is always on. You can confirm the result directly on the display, which makes it easier to check the composition or focus. Image stabilization is only active at the moment of shooting. Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally. • If camera shake is too strong, attach the camera to a tripod. If you attach the camera to a tripod, you should set the IS Mode to [Off]. • When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically. 123 Changing Playback Function Settings You can adjust the settings in the 1 tab by pressing the 1 button (p. 47). . Choosing the Image that First Displays in Playback . Choose [Resume], then press the qr buttons to choose an option. Resumes with the image last Last seen viewed. Resumes with the most recently Last shot shot image. 124 10 Useful Information This chapter introduces how to use the AC adapter kit (sold separately), troubleshooting tips, and contains lists of functions and items that appear on the screen. The index also appears at the end. 125 Using Household Power If you use AC Adapter Kit ACK-D60 (sold separately), you can use the camera without worrying about how much charge is left in the battery. 1 Insert the coupler. . Open the cover (p. 16) and insert the coupler as shown until it locks into place with a click. . Close the cover (p. 16). Terminals 2 Plug the cord into the coupler. . Open the cover and fully insert the plug into the coupler. 3 Connect the power cord. . Connect the power cord to the compact power adapter, then plug the other end into a power outlet. . You can turn the camera on to use it. . After you finish, turn off the camera and unplug the power cord from the power outlet. Do not unplug the plug or power cord with the camera turned on. This could erase images you have taken or damage the camera. 126 Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the power button, but nothing happened. • Confirm that the battery is properly inserted (p. 16). • Confirm that the battery is not depleted (p. 15). • Confirm that the memory card/battery cover is securely closed (p. 17). • If the battery terminals are dirty, battery performance will decrease. Clean the terminals with a cotton swab and re-insert the battery several times. Battery is consumed quickly. • Battery performance decreases at low temperatures. Warm the battery, for example, by placing them in your pocket, taking care that the terminals do not come into contact with any metal objects. Lens will not retract. • Do not open the memory card/battery cover while the power is on. After closing the memory card/battery cover, turn the power on then back off (...
Otros modelos de este manual:Cámaras - PowerShot A3100 IS (3.04 mb)