Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Preventing Malfunctions ¦ Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. ¦ Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag. ¦ If Condensation Forms Inside the Camera Stop using the camera immediately if you detect condensation. Continued use may damage the equipment. Remove the CF card, and battery or a household power source, from the camera and wait until the moisture evaporates completely before resuming use. Quick Start 1 Charge the Battery (p. 15). Charge the battery using the supplied battery charger. The charging is complete when the charge indicator turns from red to green. • Please note that the battery charger shape varies between regions. Charge indicator Install the Battery (p. 17). Open the CF card slot/battery cover. Hold back the battery lock in the direction of the arrow using the corner of the battery pack, then insert the battery pack into the compartment until it is locked. Terminals Battery lock Install the CF card (p. 19). 4 Open the lens cover (p. 24). The camera powers up into Shooting mode. • If the [Set Date/Time] menu appears on the LCD monitor, set the date and time (p. 21). • For information about how to change the language, see Setting the Language (p. 23). Turn the Shooting Mode dial to (p. 45). Quick Start 6Focus (p. 33). Aim the camera and lightly press the shutter button halfway. Two beeps will sound when the autofocus is set. 7Shoot (p. 33). Press the shutter button all the way. You will hear the sound of the shutter close when the shot is complete. View the recorded image (p. 47). The recorded image appears in the LCD monitor for approximately 2 seconds. Keep your finger on the shutter button, or press on the multicontroller while the image is displayed to continue to display the image after the shutter button is released. To Immediately Delete the Displayed Image 1. Press the button while the image is displayed. 2. Confirm that [Erase] is selected and press on the multicontroller. 9 Components Guide Front View Lens Lens Cover (p. 24) Speaker Flash (p. 54) Microphone (p. 113) (Audio/VideoOut) Terminal(p. 144) Terminal* (p. 126, 127) Optical Viewfinder Window (p. 32) Shooting Mode Dial (p. 13) Terminal Cover Shutter button (p. 33) AF-assist Beam (p. 34) Red-Eye Reduction Lamp (p. 54) Self-Timer Lamp (p. 64) Zoom Lever Shooting: (Telephoto)/ (Wide Angle) p. 35 Replaying: (Zoom in)/ (Zoom out) p. 106 * To connect the camera to a computer or printer, use one of the following cables. • Computer: USB Interface Cable IFC-300PCU (supplied with this camera) • Direct Print Compatible Printer (optional): Direct Interface Cable DIF-100 (supplied with Direct Print compatible printers) •Bubble Jet Printer with the direct print function (optional): Please refer to the Bubble Jet Printer user guide. Please refer to your System Map to find out which direct print function compatible printer can be used with this camera. Back / Bottom View Preparing the Camera, Basic FunctionsViewfinder (p. 32) Strap Mount DC Coupler Cable Cover(p. 162) CF Card Slot/Battery Cover(p. 17, 19) Tripod Socket Attaching the Wrist Strap* * Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap. 0000000000000000000000 • The LCD monitor is covered with a thin plastic film for protection against scratches during shipment. Remove it before using the camera. 11 Button (p. 98, 100, 119) (Single image erase) (Manual Focus) / (p. 77, 90, 92, 113) (Microphone) Button (Light Metering) / Button (p. 98, 100, 119) (Single image erase) (Manual Focus) / (p. 77, 90, 92, 113) (Microphone) Button (Light Metering) / Controls (White Balance) /Power/Mode Indicator (p. 24) (Function) Button (p. 36, 79, 80) (Exposure) / Power/Replay Lever (p. 24, 26) (Flash) / (Index) Button (p. 54, 107) (Macro) / Multicontroller (p. 14, 74) (Jump) Button (p. 63, 108) . Upper IndicatorThe indicators light or blink when the shutter button is pressed or thefollowing operations are underway. • Green: Ready to record / Ready to communicate (during a computerconnection) • Blinking Green: Recording to CF card / Reading CF card / Erasing from CF card/ Transmitting data (during a computer connection) • Orange: Ready to record (flash on) • Blinking Orange: Ready to record (camera shake warning) . Lower Indicator • Yellow: Macro mode / Manual focus mode • Blinking Yellow: Focusing difficulty (although you can press the shutter button, try usingfocus lock or adjusting the focus manually, p. 100) (Menu) Button (p. 36) (Display) Button (...