Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Beep, beep (Image is in focus.) • The focus frame in the screen shots included in this manual is shown at .. Note that you can change the form of the focus frame, if you want (page 75). Quick Start Basics 24 3. Continuing to keep the camera still, press the shutter button the rest of the way down. This records the snapshot. Full-press Snap (Image is recorded.) Recording a Movie [0] (Movie) Press [0] (Movie) to start movie recording. Press [0] (Movie) again to stop movie recording. See page 51 for details. . If the image does not focus... If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again. . Shooting with Auto If the subject is not in the center of the frame... “Focus lock” (page 39) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen. To track the movement of a moving subject Half-press the shutter button to follow and focus automatically on a moving subject. See “E Tracking” (page 40) for more information. Quick Start Basics 25 . Shooting with Premium Auto • In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto. – Auto Focus is normally performed until you half-press the shutter button (Continuous AF (Page 72)). – Intelligent AF (Page 40) – Face Detection (Page 44) – Make-up/Landscape (Pages 48, 49) • Shooting with Premium Auto can cause vibration and noise to occur due to lens operation. This does not indicate malfunction. • When Shooting with Premium Auto, the message “Processing Premium Auto. Please wait...” may appear on the monitor screen. If you feel the camera is taking too long to process data, try shooting with standard Auto instead. • In some cases, Premium Auto may not be able to interpret the shooting environment correctly. If this happens, shoot with standard Auto. Quick Start Basics 26 Viewing Snapshots Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 85. 1. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory. • Information about the displayed snapshot also is included (page 174). • You also can clear the information to view only the snapshot (page 149). [p] (PLAY) • You can zoom in on the image by sliding the zoom controller towards z (page 88). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it. 2. Use [4] and [6] to scroll between images. • Holding down either button scrolls at high speed. [6] [6] [4] [4] NOTE • Half-pressing the shutter button while in the PLAY mode or while a menu screen is displayed will switch directly to the REC mode. Quick Start Basics 27 Deleting Images Deleting Images If memory becomes full, you can delete images you no longer need to free up storage and record more images. IMPORTANT! • Remember that a file (image) delete operation cannot be undone. • Deleting an audio snapshot (page 105) deletes both the snapshot and the audio file. 1.Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). To delete a single file 2. Use [4] and [6] to scroll through the files until the one you want to delete is displayed. 3. Use [8] and [2] to select “Delete” and then press [SET]. • To delete other files, repeat steps 2 and 3. • To exit the delete operation, press [MENU]. To delete specific files 1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). 2. Use [8] and [2] to select “Delete Files” and then press [SET]. • This displays a file selection screen. 3. Use [8], [2], [4], and [6] to move the selection boundary to the file you want to delete, and then press [SET]. • This will select the check box of the currently selected file. 4. Repeat step 3 to select other files, if you want. After you are finished selecting files, press [BS]. 5. Use [8] and [2] to select “Yes” and then press [SET]. • This deletes the files you selected. • To exit the delete operation, press [MENU]. Quick Start Basics 28 To delete all files 1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). 2. Use [8] and [2] to select “Delete All Files” and then press [SET]. 3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files. This will cause the message “There are no files” to appear. Snapshot Shooting Precautions Operation • Never open the battery cover while the back lamp is flashing green. Doing so can result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc. • If unwanted light is shining directly onto the lens, shade the lens with your hand when shooting an ima...