Votos - 3, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s monitor screen may not operate normally while the HDMI cable is connected. • Audio is monaural. • Some TVs may not be able to output images and/or audio correctly. • Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required. Viewing Snapshots and Movies 78 . Selecting the HDMI Terminal Output Method (HDMI Output) Procedure [MENU] * Set Up Tab * HDMI Output Use this setting to select the digital signal format when connecting to a TV with an HDMI cable. Auto This setting will cause the format to change automatically in accordance with the connected TV. Normally, you should use this mode. 1080i 1080i format output* 480p 480p format output 576p 576p format output * 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output method may be 576p when outputting to a digital TV in a PAL reception area that does not support 1080i 60i. If you are in a PAL reception area and nothing is displayed automatically, change the setting to 576p. • If an image does not appear when “Auto” is selected as the output method, try changing this setting to something else. Recording Camera Images to a DVD Recorder or Video Deck Use one of the following methods to connect the camera to the recording device using the camera’s bundled AV cable. – DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals. – Camera: USB/AV port You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can record movies by selecting “» Only” for the slideshow “Images” setting (page 80). When recording images to an external device, use [8] (DISP) to clear all indicators from the monitor screen (page 152). For information about connecting a monitor to the recording device and about how to record, see the user documentation that comes with the recording device you are using. Viewing Snapshots and Movies 79 Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 58. Playing a Slideshow on the Camera (Slideshow) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Slideshow Start Starts the slideshow. Images Specifies the type of images to be included in the slideshow All images: Snapshots and movies T Only: Snapshots only » Only: Movies only Date Setting: Images from specific dates • Perform the following steps to specify a date. 1Use [8], [2], [4], and [6] to move the red selection boundary the date you want to select, and then press [SET]. This will select the check box of date you selected. 2Repeat step 1 to select all of the dates whose images you want include in the slideshow. 3After selecting all of the images you want, press [BS]. • If you save an image using any one of the following functions, the image will appear in the calendar on the date that you saved. Lighting, White Balance, Brightness, Resize, Trimming, Copy, MOTION PRINT • If you edit the date and/or time of an image, the image still will appear on the date it was originally recorded. • You can select up to 15 images for a slideshow. • All currently selected slideshow images are deselected whenever you turn off the camera. Time Time from the start to the end of the slideshow 1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes Other Playback Functions (PLAY) 80 Interval Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”. If you specify a value from 1 to 30 seconds, images change at the specified interval, but the movies will continue to play until the end. When the slideshow reaches a movie file while “MAX” is selected, only the first frame of the movie will displayed. Effect Select the effect you want. Pattern 1 to 4: Plays background music and applies an image change effect. • Patterns 1 through 4 have different background music, but they all use the same image change effect. • The currently selected image change effect setting is disabled automatically in following cases. – When playing a slideshow for which “» Only” is selected for the “Images” setting – When the interval setting is “MAX”, 1 second or 2 seconds. – Before and after playback of a movie Off: No image change effect or background music Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”. If you specify a value from 1 to 30 seconds, images change at the specified interval, but the movies will continue to play until the end. When the slideshow reaches a movie file while “MAX” is selected, only the first frame of the movie will displayed. Effect Select the effect you want. Pattern 1 to 4: Plays background music and applies an image change effect. • Patterns 1 through 4 have different background music...