Votos - 5, Puntuación media: 3.8
(
)
)
|
Resumen del manual
• This displays the names of the files in built-in memory or on the loaded memory card. 4. Use [] and [] to select the file you want to copy to the FAVORITE folder. 5. Use [] and [] to select “Save”, and then press [SET]. • This copies the displayed file to the FAVORITE folder. 6. After copying all of the files you want, use [] and [] to select “Cancel”, and then press [SET] to exit. 103 FILE MANAGEMENT NOTES • Copying an image file with the above procedure creates a 320 x 240-pixel QVGA-size image in the FAVORITE folder. • A file copied into the FAVORITE folder is automatically assigned a file name that is a serial number. Though the serial number starts from 0001 and can go as high as 9999, the actual upper end of the range depends on built-in memory capacity. Remember that the maximum number of images that can be stored in built-in memory depends on the size of each image and other factors. To display a file in the FAVORITE folder 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Favorites”, and then press []. 3. Use [] and [] to select “Show”, and then press [SET]. • If the FAVORITE folder is empty, the message “No Favorites file!” appears. 4. Use [] (forward) and File Name [] (back) to scroll through the files in the FAVORITE folder. 5. After you are finished viewing files, press [MENU] twice to exit. 104 FILE MANAGEMENT NOTE • Holding down [] or [] scrolls images at high speed. IMPORTANT! • Note that a FAVORITE folder is created in the camera’s built-in memory only. No FAVORITE folder is created on a memory card when you use one. If you want to view the contents of the FAVORITE folder on your computer screen, you need to remove the memory card from the camera (if you are using one) before placing the camera onto the USB cradle to start data communication (pages 127, 137). To delete a file from the FAVORITE folder 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Favorites”, and then press []. 3. Use [] and [] to select “Show”, and then press [SET]. 4. Press [] ( ). 5. Use [] and [] to select the file you want to delete from the FAVORITE folder. 6. Use [] and [] to select “Delete”, and then press [SET]. • To exit the file delete operation without deleting anything, select “Cancel”. 7. After deleting all of the files you want, use [] and [] to select “Cancel”, and then press [SET] to exit. 105 FILE MANAGEMENT IMPORTANT! • You cannot use the delete operations on page 93 to delete images from the FAVORITE folder. Performing the memory format operation (page 119), however, does delete FAVORITE folder files. To delete all files from the FAVORITE folder 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Favorites”, and then press []. 3. Use [] and [] to select “Show”, and then press [SET]. 4. Press [] ( ). 5. Use [] and [] to select “All File Delete”, and then press [SET]. IMPORTANT! • You cannot use the delete operations on page 93 to delete images from the FAVORITE folder. Performing the memory format operation (page 119), however, does delete FAVORITE folder files. 106 OTHER SETTINGS Turning the Key Tone On and Off (EX-S20U) Use the following procedure to turn the tone that sounds when you press a key on and off. 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Beep”, and then press []. 3. Use [] and [] to change the setting, and then press [SET]. To do this: Select this setting: Turn on the key tone On Turn off the key tone Off Configuring Sound Settings (EX-M20U) With the EX-M20U, you can configure separate sounds for startup, shutter release, and key operations. To configure sound settings 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Sounds”, and then press []. 3. Use [] and [] to select the sound whose setting you want to configure, and then press []. 107 OTHER SETTINGS 4. Use [] and [] to change the setting, and then press [SET]. To do this: Select this setting: Select a built-in sound Sound 1 through Sound 5 Turn off the soundOff NOTE • The default sound setting for all operations is “Sound 1”. To set the volume level 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Sounds”, and then press []. 3. Use [] and [] to select “Volume”. 4. Use [] and [] to specify the volume setting you want, and then press [SET]. • You can set the volume in the range of 0 (no sound) to 7 (loudest). NOTE • The initial default volume setting is 3. 108 OTHER SETTINGS Specifying an Image for the Startup Screen You can specify an image you recorded with the camera as the startup screen image, which causes it to appear on the monitor screen for about two seconds whenever you turn on the camera. 1. In the REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Startup”, and then press []. 3. Use [] and [] to display the image you want to use as the startup image. 4. Use [] and [] to change the setting, and then press [SET]. IMPORTANT! • ...