Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
•If you make a mistake when configuring the language, date, and time settings, you can change the settings (pages 210, 214). 1.Slide open the lens cover to turn on the camera. •Take care that you do not touch the lens when sliding the lens cover. 2.Use [..], [..], [..], and [..] to select the language you want and then press [SET]. 3.Use [..], [..], [..], and [..] to select the area where you will use the camera and then press [SET]. 4.Use [..] and [..] to select the city where you will use the camera and then press [SET]. 5.Use [..] and [..] to select the summer time (DST) setting you want and then press [SET]. Configuring Display Language, Date, and Time Settings [] [] [] [] [SET] Lens Cover Zoom Controller QUICK START BASICS 11 6. Use [..] and [..] to select the date format and then press [SET]. Example: December 19, 2007 To display the date like this: Select this option: 07/12/19 YY/MM/DD 19/12/07 DD/MM/YY 12/19/07 MM/DD/YY 7. Set the date and the time. Use [..] and [..] to select the setting you want (year, month, day, hour, minute) and then use [..] and [..] to change the setting. To switch between 12-hour and 24-hour format, slide the Zoom Controller. 8. When settings are completed, press [SET]. 9. Close the lens cover to turn off the camera. • After finishing this procedure, advance to the procedure on the next page. QUICK START BASICS 12 13 QUICK START BASICS (page 46) ¦ Loading a Memory Card into the Camera When a memory card is loaded, the camera stores images you shoot on the card. NOTE • Though the camera has built-in memory, using a memory card provides additional capacity you can use to store more images, high-quality and large-size images, and longer movies. • The camera will store images in its built-in memory if there is no memory card loaded. If you prefer to use built-in memory, skip this procedure and go to “Shooting a Snapshot” on page 15. • For information about memory card capacity, see page 282. 1. Open the battery cover. 2. Load a memory card into the camera. With the front of the memory card facing upwards (towards the monitor screen side of the camera), slide it into the card slot and press until it clicks securely into place. 3. Close the battery cover. Using a Memory Card 1 2 While pressing lightly on the cover, slide it in the direction indicated by the arrow to open. Front MEMORY CARD Front Back 1 2 ¦ Formatting a Memory Card Before you can use a memory card with your camera, you must format it. IMPORTANT! •Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again. However, if storing to a card has slowed down or if you notice any other abnormality, re-format the card. •Be sure to perform the following procedure on the camera to format the memory card. 1.Slide open the lens cover to turn on the camera. •Take care that you do not touch the lens when sliding the lens cover. 2.Press [MENU]. 3.Use [..] and [..] to select the “Set Up” tab. 4.Use [..] to select “Format” and then press [..]. 5.Press [..] to select “Format” and then press [SET]. •To cancel formatting, select “Cancel” and then press [SET]. •Wait until the “Busy... Please wait...” message disappears from the monitor screen before doing anything else. [] [] [] [SET][] Lens Cover [MENU] “Set Up” Tab ¦Formatting a Memory Card Before you can use a memory card with your camera, you must format it. IMPORTANT! •Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again. However, if storing to a card has slowed down or if you notice any other abnormality, re-format the card. •Be sure to perform the following procedure on the camera to format the memory card. 1.Slide open the lens cover to turn on the camera. •Take care that you do not touch the lens when sliding the lens cover. 2.Press [MENU]. 3.Use [..] and [..] to select the “Set Up” tab. 4.Use [..] to select “Format” and then press [..]. 5.Press [..] to select “Format” and then press [SET]. •To cancel formatting, select “Cancel” and then press [SET]. •Wait until the “Busy... Please wait...” message disappears from the monitor screen before doing anything else. [] [] [] [SET][] Lens Cover [MENU] “Set Up” Tab QUICK START BASICS 14 (page (page 56) 1.Slide open the lens cover to turn on the camera. •Take care that you do not touch the lens when sliding the lens cover. 2.Align the mode dial with “ ” (Snapshot). This causes “ ” to appear on the monitor screen. •If “ ” (PLAY Mode) is on the monitor screen, make sure that the lens cover is open and then press the shutter button or [ ] (PLAY). This will switch to the currently selected REC Mode. 3.Point the camera at the subject. 4.While taking care to keep the camera still, half- press the shutter button. When the image is in focus, the camera will beep, the operation lamp will light green, and the focus frame will turn green. Shooting a Snap...