Iniciar sesión:
Votos - 2, Puntuación media: 3.5 ( )

Manual de usuario Casio, modelo EX-Z65

Fabricar: Casio
Tamaño del archivo: 3.99 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:
Cámaras - EX-Z65 (8.11 mb)es
Cámaras - EX-Z65 (4.05 mb)de

Resumen del manual


• If the old photograph is portrait orientation, be sure to compose the image with the camera in landscape (horizontal) orientation. USING BEST SHOT 94 NOTE E • When the camera is at an angle to the photograph you are recording, the shape of the photograph may appear distorted in the recorded image. Auto keystone correction corrects for this distortion, which means that a photograph appears normal even if you record it at an angle. ¦ Selecting the Old Photo Scene 1. In the REC mode, press [BS]. 2. Use [..], [..], [..], and [..] to select the “Old Photo” scene and then press [SET]. “Old Photo” will remain selected until you select a different BEST SHOT scene. ¦ Recording an Image with Old Photo 1. Press the shutter button to shoot the image. • This displays a photograph contour confirmation screen and then saves the original recorded image. An error message will appear (page 225), without displaying the photograph contour confirmation screen, if the camera is unable to find the contour of the photograph. 2. Use [..] and [..] to select the candidate you want to correct. 3. Use [..] and [..] to select “Trim” and then press [SET]. This displays a cropping boundary on the monitor screen. • To cancel the correction operation, select “Cancel”. USING BEST SHOT 95 4. Use the zoom button to change the cropping boundary to the desired size. 5. Use [..], [..], [..], and [..] to move the selection boundary to the desired location and then press [SET]. The camera will correct color automatically and save the corrected image. • If you do not want a border around the resulting image, select and area that is smaller than the original image. • To cancel the restoration operation at any point and save the image as-is, press [MENU]. IMPORTANT! • Digital zoom is disabled while recording with Old Photo. However, you can use optical zoom. • When recording the image of a photograph, the camera will not be able to recognize the shape of the photograph in the following cases. – When part of the photograph extends outside of the monitor screen – When the subject is the same color as the background it is placed upon • The maximum Old Photo image size is 2M (1600 . 1200 pixels). When the camera is configured to record images smaller than 2M (1600 . 1200 pixels), Old Photo will produce images in accordance with the currently specified image size. • Under certain conditions, restored colors may not produce the desired results. USING BEST SHOT 96 ADVANCED SETTINGS Changing the Focus Mode Your camera provides you with the five focus modes described below. The initial factory default focus mode is Auto Focus. Focus Mode Description Focus Range* Auto Focus Automatic focus when the shutter button is half-pressed. During movie recording, the Auto Focus Mode is disabled and the camera switches to the Pan Focus Mode automatically. Auto adjustment (Approximately 40 cm to (1.3' to )) • Minimum distance position varies with optical zoom. Macro (Close-up) Used for close-up shooting. Macro Focus becomes fixed focus while shooting a movie. Auto adjustment (10 cm to 50 cm (3.9" to 19.7")) • Minimum distance position varies with optical zoom. Pan Focus Fixed focus for relatively wide-range focusing. Use Pan Focus (PF) under conditions where Auto Focus is difficult. Fixed distance • Focus range varies with optical zoom position. Infinity Focus Focus is fixed at infinity. Use this mode when shooting scenery and other faraway images. Infinity Manual Focus Focus is performed manually. • Focus range varies with optical zoom factor. Optical Zoom Factor Range 1X 10 cm to (0.3' to ) 3X 60 cm to (2.0' to ) * “Focus Range” indicates distance from the lens surface. ADVANCED SETTINGS 97 Perform the following steps to change the focus mode. 1. In the REC mode, press [MENU]. 2. On the “REC” tab, select “Focus” and then press [..]. 3. Use [..] and [..] to Focus Mode Icon select the focus mode setting you want and then press [SET]. An icon appears on the monitor screen to indicate the current focus mode. • See the following pages of this section for details about shooting with each focus mode. Using Auto Focus 1. Align the monitor screen’s focus frame with the subject you want to focus and then half- press the shutter button. This camera will perform the focus operation. You can tell if the image is in focus by checking the operation lamp and the focus frame color. ISO100ISO100 F3.1 1/60 AWB ISO 15:37 N2 EV 123 Focus Frame Operation Lamp Status Operation Lamp Focus Frame Focusing Complete Lit Green Green Not Focused Flashing Green Red ADVANCED SETTINGS 98 2. When the image is focused, press the shutter button the rest of the way to shoot. IMPORTANT! • During movie recording, the Auto Focus Mode is disabled and the camera switches to the Pan Focus Mode automatically. NOTE • When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera will switch to the Macro Focus range automatically (Auto Macro). • Whenever you perform an opt...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría