Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
recognition setting to change to “Normal”. You will need to change the face recognition setting again after turn on the camera. You can tell the camera to remember the Auto Shutter setting by selecting “On” for the “Auto Shutter” power on default setting (page 72). Digital zoom 1)The digital zoom setting may be turned off. Turn on digital (including HD zoom (page 69). zoom) does not 2)Date stamping may be turned on, which will cause digital work. The zoom zoom to be disabled. Turn off date stamping (page 130). bar indicates zoom 3)Digital zoom is disabled when some BEST SHOT scenes only up to a zoom (Business cards and documents, White board, etc.) are factor of 4.0. selected. Select another scene (page 51). A family member’s Though face characteristics were pre-recorded for your family face is not detected member, the data may have been faulty. Other possible causes correctly, even may be shooting at an angle or the facial features of the subject. though the face Try re-recording the face of the family member who is not being has been pre- detected (page 36). recorded. When shooting Auto Shutter may not trigger when shooting under very bright or with Auto Shutter, very dark conditions, or when shooting a fast moving subject, the shutter does etc. If this happens, try changing the Auto Shutter Trigger not trigger. Sensitivity setting (page 32), or press the shutter button all the way down to release the shutter and shoot the image. The image is out of 1)Focusing may not be possible because the subject is outside focus during movie the focus range. Shoot within the allowable range. recording. 2)The lens may be dirty. Clean the lens (page 142). Playback The color of the Sunlight or light from another source may be shining directly playback image is into the lens when you are shooting. Position the camera so different from what sunlight does not shine directly into the lens. appears on the monitor screen when shooting. Images are not This camera cannot display non-DCF images recorded onto a displayed. memory card using another digital camera. Appendix 159 Problem Possible Cause and Recommended Action Images cannot be 1)Note that you cannot edit the following types of snapshots. edited (with Layout • Snapshots created using MOTION PRINT Print, resizing, •Movies trimming, keystone • Snapshots recorded with another camera correction, color 2)With keystone correction and color restoration, editing is not restoration, date/ possible if the camera cannot find a shape to edit within the time editing, frame on the monitor screen (pages 93, 94). rotation). Other The wrong date The date and time setting is off. Set the correct date and time and time are (page 130). displayed. The messages on The wrong display language is selected. Change the display the display are in language setting (page 131). the wrong language. Images cannot be 1)The USB cable may not be connected securely. Check all transferred over a connections. USB connection. 2)The wrong USB communication protocol is selected. Select the correct USB communication protocol in accordance with the type of device you are connecting (pages 109, 118). 3)If the camera is not turned on, turn it on. 4)Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port. Language selection 1)You did not configure initial settings after purchasing the screen appears camera or the battery may have been left with a dead battery. when the camera is Check the camera setup (pages 13, 131). turned on. 2)There may be a problem with the camera’s memory data. If this is the case, perform the reset operation to initialize the camera’s setup (page 135). After that, configure each setting. If the language selection screen does not re-appear when you turn the camera on, it means that the camera’s memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. Appendix 160 Display Messages Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. Cannot correct image! Keystone correction of the image cannot be performed for some reason. The image will be stored as-is, without correction (page 57). Cannot find the file. The image you specified with the slideshow “Images” setting cannot be found. Change the “Images” setting (page 84) and try again. Cannot register any more files. You are attempting to save a user BEST SHOT scene in the “SCENE” folder when the folder already contains 999 user scenes (page 53). Card ERROR There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 135). IMPORTANT! • Form...